Toshiba B-852 owner manual Real Time Clock Setting 3 Low Battery Check Setting, Cont

2. PRINTER SETUP

ENGLISH VERSION EO1-33055

2.9 Setting an Operating Environment

2.9.6 Real Time Clock Setting (3) Low Battery Check Setting
(Cont.)	This parameter is to choose whether to activate the low battery check
	function or not.

NOTE:

1.	Be sure to load the battery and set
	the low battery check function to
	ON whenever the real time clock
	is used. If the battery is not
	loaded or the battery voltage is
	low, the real time clock data is
	erased at the power off time.
2.	When the low battery check
	function is set to ON and if the

LOW BATT. CHECK

Press the [PAUSE] key to set.

LOW BATT. ON

[RESTART]

	LOW BATT. OFF
[FEED]

Low battery check is activated.

Low battery check is not activated.

battery voltage is 1.9V or less, the

printer will result in a “LOW

BATTERY” error and stop at the

power on time. As a restart is

invalidated in this case, hold

down the [RESTART] key to

cause the printer to enter

<1>RESET mode, access the Real

Time Clock setting mode, and set

After selecting the low battery check, press the [PAUSE] key.

(4) RTC Data Renewal Timing Setting

This parameter is to choose the RTC data renewal timing.

RENEWAL

Press the [PAUSE] key to set.

the low battery function to OFF.

[RESTART]

[FEED]

RENEWAL BATCH

Batch print is possible. However, the same time is printed on the all media issued in a batch because the real time clock data is read only for the first media.

RENEWAL PAGE

A real time can be printed on each media. However, the printer needs to stop the motion before printing each media to read the real time clock data.

After selecting the RTC data renewal timing, press the [PAUSE] key. The current date is displayed.

DATE 06/03/01

Press the [FEED] and [RESTART] keys at the same time to return to the <8>RTC SET display.

<8>RTC SET

E2-33