Toshiba MA-600-1 owner manual digit 7-segment Numeric Display, Message Description Status Lamps

5. DISPLAY			EO1-11155
			5.2 10-digit 7-segment Numeric Display
		ERROR MESSAGE TABLE (continued)
	Error Message	Cause of the Error	Canceling the Error
	(Standard Setting)
	SH_TEND PROHIBIT	The depressed key has been programmed with	Perform a registration operation so as not to result in
		the status of short-tendering prohibition.	short-tendered amount.
	SLIP OFF LINE	Remote slip printer is off line status.	When this error message is displayed, the [ITEM
		(The remote slip printer is off or the printer cable	CORR] key depression will let a confirmation message
		is disconnected.)	displayed. By following the confirmation message, the
			[ITEM CORR] key depression will let the printer
			disconnected, meanwhile the [C] key depression will
			let the printer remain connected.
	SLIP PAPER OUT	No slip paper is set.	Set a slip paper on the remote slip printer.
	TENDER ONLY	Tender only error	The depressed key has been programmed with the
			tender-only status. Contact your nearest TOSHIBA
			TEC representative if necessary.
	TOTAL ONLY	Total only error	The depressed key has been programmed with the
			total-only status. Contact your nearest TOSHIBA TEC
			representative if necessary.
	TXBL TL COMP	[TXBL TL] key entry compulsion error	Depress the [TXBL TL] key prior to the sale
			finalization operation.
	VALIDATION CMP	The operation requires a validation print.
	VOLTAGE ERROR	Printer voltage error	Contact your nearest TOSHIBA TEC representative.

It is recommended to prepare a copy of the above table, and place it near the ECR.

5.2 10-digit 7-segment Numeric Display

(1) Numeric Display

Amount (8 digits)	Displays the numeric data such as amount and quantity. When the obtained total or
	subtotal amount is 10-digit value, the X and DPT digits are also used for the amount
	display. When no entries are under way and the Mode Lock is in the REG position, the
DPT (2 digits)	current time is displayed.
	Displays a Department Code of a department item just entered. The department name is
	also displayed in the LCD display. It remains lit when the entry of the same department
X (1 digit)	item is repeated.
	Displays the repeat count of the same Department or PLU item. The count is indicated
	from the second entry on, and only the lowest digit of the repeat count will be displayed
	even when the count exceeds nine (such as “0” for 10, “1” for 11, etc.)

5.3 Message Description (Status Lamps)

Status Lamp	Color
ALM	Red
SLIP	Green
R OFF	Red
SIGN ON	Green
PC	Green
TL	Green
ST	Green
CG	Red

Description

Illuminates with the alarm buzzer generated to indicate that the last operation or numeric entry was an error. To clear the error status, depress the [C] key. Blinks when the program option “slip print compulsory” has been selected. This lamp does not illuminate even when a slip is set to the slip printer.

Illuminates when the Receipt-OFF mode is declared by the [LOG/RECEIPT] (or [RECEIPT]) key. In this condition, no receipts will be issued for a sale to be entered. It extinguishes by depressing the [LOG/RECEIPT] (or [RECEIPT]) key again for Receipt-ON mode.

Illuminates only when the Cashier Code Entry method is selected. It illuminates when a cashier has signed ON. It extinguishes when the cashier has signed OFF, and the message “LOG” is displayed in the LCD display instead.

Illuminates during data communication between the ECR and a PC.

Illuminates on a finalizing operation with the total amount displayed when the sale is finalized without any amount tendered.

Illuminates when the [ST] key is depressed, indicating that the displayed amount is subtotal.

When an amount tendering operation is performed, it illuminates with the change due displayed.

5- 4