Toshiba MA-600-1 owner manual Cashier Signing or Cashier KEY Operations, Cashier Code Entry

9. CASHIER SIGNING OR CASHIER KEY OPERATIONS EO1-11155

9.1 Cashier Code Entry

9. CASHIER SIGNING OR CASHIER KEY OPERATIONS

9.1 Cashier Code Entry

Each cashier will sign-ON or sign-OFF through the [LOG/RECEIPT] (or [LOG]) key.

OPERATION: Mode Lock: REG (or, MGR or “

-

“ with Manager Intervention)

([LOG/RECEIPT] = [LOG])

(1) For Single-drawer Machines

Sign-ON [LOG/RECEIPT]

Sign-OFF 0 [LOG/RECEIPT]

A Sign-ON receipt is issued, and sales entries are now possible.

2-digit cashier code

(01 to 08)

2-digit cashier’s own secret code

(01 to 99) (NOTE 1)

A Sign-OFF receipt is issued, and no sales entries will be accepted.

Sign-ON..........to be operated to start the job.

Sign-OFF........to be operated to end the job.

NOTES: 1. As cashier’s own secret code, the code used for Sign-ON just after the issuance of cashier reset report is programmed. The secret code will be cleared when the cashier reset report is output.

2.At the sign-ON or sign-OFF time, only the journal print is performed and none of the receipt is issued by the programming option setting.

3The secret code and the cashier code should be entered in two-digit numeric values. (i.e. Enter “01” for the code 1.)

(2)Mode Changes with Signing Operations

When Signed-ON:

The Mode Lock position change is allowed within “LOCK”, “REG”, “MGR”, and “ position will be an error.

-

”. Changing to any other

When Signed-OFF:

The Mode Lock may be turned to any position. Therefore, it is best for the cashier (or all the cashiers on a Multi-drawer Machine) to sign-OFF before the Mode Lock is turned to the “LOCK”, “X”, “Z”, or “SET” position.

NOTE: A program option provides a selection not to print nor issue SIGN ON/SIGN OFF receipt on any signing operation.

9.2 Cashier Key Method ([CLK] Keys)

When the [LOG/RECEIPT] (or [LOG]) key is not installed, [CLK] keys ([CLK 1] to [CLK 8]; max. 8 keys) may be provided on the ECR keyboard.

Sale entries will be possible only when one of the [CLK] keys is depressed (in “REG”, “MGR”, or “ - ” mode). When the same [CLK] key is again depressed, the cashier is in Sign-OFF status.

A program option provides a selection to display or not display the cashier code (1 to 8) of the cashier being Sign-ON condition at the “DPT” digit on the 7-segment numeric display of the Operator Display.

9- 1