3. READ (X) AND RESET (Z) REPORTS

EO1-11155

3.2 General Notes On Report Takings

EFT Batch

(1)Open Batch

An open batch command is sent to the EFT terminal to declare the use of the batch file. This operation is performed before the store opens.

Example

Operation: Mode Lock: X for read Z for reset

When the ECR is being outside a sale and in Z mode, depress the [↓] key twice to select “3 EFT(BATCH)”. And depress the [3] or [Enter] key.

Select “1 OPEN BATCH”, then depress the [1] or [Enter] key.

The open batch is in process.

When the operation was successfully completed, this message is displayed.

If it was failed, an error message is displayed. (NOTE 1)

Journal Print Format

OPEN BATCH

OK 9999 07:30TM

CLOSE BATCH

NG BATCH ALREADY OEPNED 9999 07:30TM

OK: The operation was successfully completed.

NG: The operation was failed.

This message is printed when Open Batch has already been executed.

NOTE:

When a response from the EFT terminal was not sent correctly, an error message “RESPONS NG” is shown on the LCD display.

When no response was sent from the EFT terminal within a specified time (standard: 30 seconds), a timeout error occurs on the ECR and an error message “NO RESPONS” is shown on the LCD display.

3-19

Page 116
Image 116
Toshiba MA-600-1 owner manual EFT Batch, Example