4. PROGRAMMING OPERATIONS

EO1-11155

4.13 PLU Name Programming

4.13PLU Name Programming

A maximum of 16 characters of name of PLU which was programmed in the PLU Table Programming operation is set here.

CONDITION

Any time outside a sale

OPERATION

Mode Lock: SET

1)Menu Tree

2)Operation Flowchart

Main Menu

2 NAMES” is

selected.

4 PLU (ITM NO.)

NAME” is selected.

Select a PLU to be

programmed.

[Enter]

Input a PLU Name.

[Enter]

[End]

ECR is being outside a sale and in SET mode.

Depress [↓] then [Enter].

Or Depress [2].

Depress [↓] key three times then [Enter]. Or Depress [4].

Select a PLU of which name is to be programmed with the [↑] or [↓] key.

The ECR enters character input mode.

A maximum of 16 one-byte or 8 two-byte characters are input.

The PLU Name is entered and printed.

This setting is ended. A long receipt is issued and the display returns to Main Menu screen.

NOTE: A maximum of 16 one-byte characters or 8 two-byte characters can be entered. A combination of both types is also available.

4-44

Page 167
Image 167
Toshiba MA-600-1 owner manual PLU Name Programming