3. READ (X) AND RESET (Z) REPORTS

EO1-11155

3.2 General Notes On Report Takings

(2)Close Batch

A close batch command is sent to the EFT terminal.

Sales transaction of the day is ended and a batch file is sent to the host to make a settlement.

Example

Operation: Mode Lock: Z for reset (reset only)

When the ECR is being outside a sale and in Z mode, depress the [↓] key twice to select “3 EFT(BATCH)”. And depress the [3] or [Enter] key.

Depress the [↓] key to select “2 CLOSE BATCH” and depress the [2] or [Enter] key.

The close batch is in process.

When the operation was successfully completed, this message is displayed.

If it was failed, an error message is displayed. (NOTE 2, NOTE 3)

TEC STORE

1343 PEACH DRIVE

PHONE: 87-6437

Open 8:00am to 7:00pm Closed: every Wednesday

10-20-2006 FRI #3001

CLOSE BATCH

OK

9999 07:30TM

OK: The operation was successfully completed.

NG: The operation was failed.

BATCH ALREADY CLOSED is printed under NG when CLOSE BATCH has already been executed.

NOTES:

1.After processing, a receipt showing the processing result is issued.

2.When no response was sent from the EFT terminal within a specified time (standard: 10 minutes), a timeout error occurs on the ECR and an error message “NO RESPONS” is shown on the LCD display.

3-20

Page 117
Image 117
Toshiba MA-600-1 owner manual Read X and Reset Z Reports