Manuals / Toshiba / Computer Equipment / Cash Register

Toshiba MA-600 manual Any time outside a sale, Mode Lock Blind POL Watch Timer #

Models: MA-600

1 191

Download 191 pages 60.21 Kb

Page 17

4. SYSTEM START-UP PROCEDURE

EO3-11106

4. SYSTEM START-UP PROCEDURE

PC Transmission Information Setting

Data transmission information setting with a PC connection is performed here.

CONDITION	Any time outside a sale
OPERATION	Mode Lock: BLIND
68 [X]			1 [ST]		POL Watch Timer [#]
68 [X]			1 [ST]		POL Watch Timer [#]
					Max. 2 digits: 0 to 99
					(Standard: 20 sec.)

2 [ST] Response Watch Timer [#]

Max. 2 digits: 0 to 99 (Standard: 20 sec.)

3 [ST] Transmission Delay Timer [#]

Max. 2 digits: 0 to 99

(1 = 20 ms)

(Standard: 3 = 60 ms)

4 [ST] Transmission Delay Timer 2 [#]

2 digits: 15 to 99

(1 = 20 ms)

(Standard: 25 = 500 ms)

[AT/TL]

NOTE: When performing the key operation of 68 [X] [AT/TL], a receipt containing the currently programmed values is issued.

Example) To set the following values;
• POL Watch Timer:	30 (sec)
• Response Watch Timer:	20 (sec)
• Transmission Delay Timer:	4 (80 ms)

•Transmission Delay Timer 2: 25 (500 ms)

Key Operation: Mode Lock: BLIND, enter 68, depress [X]. 1 [ST] 30 [#] POL Watch Timer

2 [ST] 20 [#] Response Watch Timer

3 [ST] 4 [#] Transmission Delay Timer

4 [ST] 25 [#] Transmission Delay Timer 2 [AT/TL] To complete this setting

TEC STORE

1343 PEACH DRIVE

PHONE: 87-6437

Open 8:00am to 7:00pm

Closed: every Wednesday

31-10-2005 MON	#3001
PC COM.
#1	30
#2	20
#3	4
#4	25
	0077 16:50TM

4- 2

Image 17

Toshiba MA-600 manual Any time outside a sale, Mode Lock Blind POL Watch Timer #, ST Response Watch Timer #

Contents

MA-600 Series Table of Contents Verification of Programmed Data Description of Model Number Main FeaturesMm width x 442 mm depth x 291 mm height Height when the customer display is fully raised 351 mmHeight including rubber feet Approximately 13.6KgStandard paper Paper Roll Receipt and JournalHigh-sensitive paper Medium-term preserving paperRemarks Indexing CapacitiesInput Item Digits Memory Type Counter or Total Basic Memory CapacitiesMemory Type Counter or Total Digits Name of Total/Counter Daily Type Financial MemoryFinancial Memory Credit-in-drawer Difference Cashier Memory Cashier Memory Counter Total Digits Digits OthersSum of Daily Net Sales Memory BalanceGT Grand Total = Sum of Daily GS Gross Sale Blind mode System START-UP ProcedureST Response Watch Timer # Mode Lock Blind POL Watch Timer #ST Transmission Delay Timer # ST Transmission Delay Timer 2 #RAM Clear RAM CLEAR, Data CLEAR, Status ClearDepress the following Numeric key Data ClearStatus Clear Depress the AT/TL key Status Clear receipt is issuedTable of Terminal File Programming Operations Operation Condition Mode LockRate %-/%+ Instructions for ProgrammingOrdinary Type Keyboard Keyboard Layout VariationsOrdinary Type Keyboard Del Keyboard layout for programming Mode Lock PositionRtn Dbl Enter Flat Type Keyboard EndMode Lock Position Keyboard layout for Read/ResetOrdinary Type Keyboard Rtn Enter Flat Type Keyboard RtnKey Enter Rtn End Key Enter Rtn FunctionKey Dbl Del History Function Character Entries Character Code Standard Characters Column Code Row Code Character Code Entry Method407 # Character Setting OperationsEnd ? a Direct Character Entry MethodUsing PK-2 PLU Keyboard hardware option Key operation Description LCD display PLU Operation History ↓ EnterExample of operation Condition Required for Programming Operations 76 AT/TL Mode Lock BlindSfkc Selective Function Key Code Programming Consignment counter Sfkc TableKey Name Memory to be opened Remarks 108 AMT Amount 109 RPT Repeat No memory 110 to 104 TRF Transfer No memory 105 to116 TX3/M Tax 3 Modifier 117 to Foreign Currency 1-in-drawerSfkc Sfkc Receipt SampleSystem Option Programming Programming in SET modeOperation LCD Display Remarks Programming in Blind mode System OP Department, on Can be issued Department Reports Both Bit 5 & 6 ResetSystem Option Table Time on Sale ReceiptPosting on Remote Slip Inps 1 for the ChargePrinter Inps 2 for the ChargeREG mode Zero-skip in All Cashier featureSkipped in the report Reports Zero-skip in PLUCompulsory for any PB Entry Remote Slip PrintDrawer Open by Print and Issue ReceiptsCashier Sign ON/OFF On Reports 568Financial and Cashier Daily Read Counter on ReportsSET Price Shift FunctionMulti-Consignment Single-Consignment orDate Print Consecutive No.Open/Close Add-on TaxFeature is selected at When Add-on TaxPrice x Rate VAT feature has been Selected Tax Type Separate Print on VAT feature has been Receipt NotePrint order of VAT TL VAT Symbol PrintNET TL Single line spacingDrawer Close Drawer Warning AlarmCompulsory Single-drawer or MultiReset on Financial Daily Z Negative Mode ResettingNo-sale Entry After Non-add # EntrySET NON-PRINT Reset Cashier Interrupt IPD or Inpd on JournalREG and MGR Modes Register No. print on Journal Date, day of week,Selection of the Store Name Message or Store Name Logo on ReceiptSubtotal within a Sale + and %-after aAutomatic Cashier Sign OFF on finalizing a saleDate Set and Print Follow Bit 2 status If both RESET, it will be OrderSpecial Rounding on Sale TotalType Amount Division Symbol Amount Division SymbolDecimal Point in Item Ex 1.5%CUR 2 Foreign CUR 1 ForeignCUR 3 Foreign CUR 4 ForeignDepartment Memory Post-issue Receipt PrintProcess for %- on Department Item PLU Memory ProcessMethod Push Sfkc Keys Cashier IdentifyingPerformed by Money DeclarationMoney Declaration is Immediately after Previous daily financial ResetConsecutive No. Print Zero-skip of PLU Data When transmitting to PCJournal Printer Narrow Printing onDisconnection Enter End Commercial Message ProgrammingDisplayed Example To program the following Commercial MessageTo program a message in a desired ECR to enter the 1st line messageProgrammed. The 3rd line message ECR to enter the 3rd line messageFooter Message is selected Footer Message ProgrammingDepress the 2 or Enter key Message already programmed is Example To program the following Footer MessageLine, move the cursor there with the ↓ Key then depress the Enter key Enter key depression results→ a g a i n Enter → → → → → → → → → →→ → → → → → C A/a a l l Input a message in the 4th line Store Name Message ProgrammingWhen Commercial Message is Reset Depress the 3 or Enter key Message already programmed is Example To program the following Store Message→ → → → → →→ Dbl T E → S T O R E EnterECR to enter the 4th line message Input a department name Department Name ProgrammingSET mode, depress the ↓ key Depress the 2 or Enter key Example To program Food as the name of DepartmentDepress the Enter key Department 01 is selectedInput a department group name Department Group Name ProgrammingExample To program the following name on Department Group Group Operation LCD DisplayDbl F R E S H Enter Department Group 1 is selectedDepartment group name already Input a cashier name Cashier Name and Status ProgrammingSET mode, depress the ↓ key ECR to enter the cashier 1 name input Status input modeMode. The C key depression clears Name already programmed. Cashier 1 name is inputMaximum of 16 characters of PLU name is programmed here PLU Name ProgrammingInput a PLU name Example To program Tomato as the name of PLU Code NoDepress the 4 or Enter key Depress the 2 or Enter key Depress the ↓ key three timesPLU Code No is selected C key depression clears the PLUEnter key Salesperson Name ProgrammingSelect a salesperson of which name is To be programmed with the ↑ or ↓Depress the ↓ key four times Example To program White on Salesperson CodeDepress the 5 or Enter key Salesperson 01 is selectedEnd key depression allows ECR to end this programming Financial Report Item Name Programming After Financial ResetInput a Financial item name Financial ITM Name is selectedDepress the ↓ key, then depress Depress the ↓ key five timesItem code 2 NET GT is selected Financial item name alreadyNET GT NEG GT EO3-11106 Terminal File Programming Vacant Anytime outside a sale Print Line Item Name ProgrammingInput a print line item name Print Item Name is selectedDepress the 7 or Enter key Depress the ↓ key six timesDepress the ↓ key six times, then Item code 7 @ Item is selectedPrint Line Item Name Table Sunday Monday Post-issue Receipt HeaderTuesday Wednesday Thursday FridayConsignment NET TotalFixed Data Preset DataDepartment Group Cashier Symbol Salesperson Symbol Remarks Display Item Name is selected Display Item Name ProgrammingInput a display item name Slip Printer Connection Check Display Item Name TableApplication Standard Program Code Depress the 8 or Enter key Depress the ↓ key seven timesDepress the ↓ key twice, then Item code 3 Total is selectedDisplay Name #003 Balance DUE Error Item Name is selected Error Item Name ProgrammingInput an error item name Required is selected C key depression clears the error Error Code 3 ManagerDepress the ↓ key eight times Depress the 9 or Enter keyContent or Cause of Error Standard Program Journal Paper Retainer Open Printer Head Temperature Error Endorsement Print Compulsory ErrorPrinter Head Voltage Error Limit Over Warning120 121 Negative Balance Error 122 123 ST Key Entry Compulsory error100 101 124 125200 Z Report Name is selected Read/Reset Report Name ProgrammingInput an X/Z report name Depress the 0 or Enter key Depress the ↓ key nine timesDepress the ↓ key twenty times, then Report No Xprofit isReport Type Standard Program Hourly Range All Department Department Gross ProfitAll Media Sales and Cash-in Drawer All PLU Zone PLUF I N C a L + D P Financial + All Department Enforced Clear of Hold Condition A N C E LCondition Operation Department Table ProgrammingPositive or Negative Department Single-item or Itemized ReceiptProhibits any amount smaller than 4,00 Allows any amount equal to or smaller than 39,99€40,00 €4,00Depress the Enter key to select Setting menuDepartment See Note below Input 01 or 1, then depressMove the cursor on to a desired status Setting with the ↓ or ↑ keyDepress the → key then the Enter VAT/Add-on tax statuses 1 and 2 areLong receipt is issued and the display Example To preset the price €1,00 on Department 1 Food Department Preset Price Setting or ChangingDepartment 1 Food Input 100 for the preset priceEnd key depression allows the ECR to end this setting Input a Lalo value Department Listing Capacity LC ProgrammingXxxxxxx Enter Digit Limitprice is selectedInput 100000, then depress the Enter Example To program 100000 for Halo and 10 for LaloHalo On the next 107Lalo End key depression allows KEY Sticker Print is selected Key Sticker PrintingFor printing part of department names On the next 110 Example To print all department namesALL DP is selected Move the cursor on to a desired To print part of department namesECR to end this operation Individual DP is selectedPLU Table Programming Menu Tree Operation FlowchartEnter 01 to PLU key Input 0010 or 10, then depressPLU Code 0010 is set Input 01 or 1, then depress Linked Department 1 is set On the next 115Input 100, then depress the Enter Preset Price €1,00 is set Input 120, then depress the EnterVAT statuses 1 and 2 are set PLU key depression completesDepress Depress ↓ three times then Enter Depress Depress ↓ then EnterDepress Input a PLU code to be deleted SET mode, depress the ↓ key TwiceIndiv Input 0501 or 501, then depressPLU Code 0501 is specified End key depression allows Depress the ALL Void key PLU Preset Price Setting or Changing On the next 121 Depress the 3 or Enter key Depress the ↓ keyDepress the 2 or Enter key Depress the ↓ key Make sure the cursor is shown on Depress the Enter key As the 3rd preset price remains01PRICE. Then, input 315 022ND PRICE. Then, input 540Assign to Keyboard is selected PLU Preset-Code Key SettingInput a desired key location code Key Location Code Keyboard Input 55, then depress the Enter key ECR to end this settingKey Location Code 55 is set To assign PLU Code 1111 on the PK-2 keyboardDepress the ↓ key Depress the 2 or Enter key RATE, Limit Amount is selected %- Rate %-/%+ is selected 26 %+ and %- Preset Rate SettingInput a Preset Rate RATE, Limit Amount is selected VAT or Add-on Tax Rate Setting Three times Depress the 4 or Enter key Example To set the following VAT rate VAT1………10%SET mode, depress the ↓ key RATE, Limit Amount is selected CUR Exchange Rate is selected Foreign Currency Exchange Rate SettingOn the next 133 CUR1 CUR2Dollar Japanese Yen €1,00 $1,20 ¥137,74 Euro Cent 3774 yen Resetting a Foreign Currency Rate Once Set RATE, Limit Amount is selected Disc AMT Limit is selected Negative Amount Key Limit Amount Setting20.00 10.00Input 1000, then depress the Enter Limit amount of the VND CPNOn the next 137 Time Setting or AdjustmentExample To set time 115 p.m 138 Date Setting or Adjustment139 Example To set Date Monday 31 OctoberInput On the next 140 Store/Register No. SettingExample To set the Register No. of this ECR Depress the ↓ key twice From the previous Operation LCD Display RemarksInput Store/Register No is set End key depression allows 141After Hourly Range Reset Hourly Range Table SettingUntil Example To set the following hourly range table800 1200 1200 1500On the next 144 Hourly Range Table Resetting ProcedureReset is selected Tone Volume Setting 147 Tone Volume LOW is selectedDepress the ↑ key Report Print Item is selected Report Item Print/Non-Print Setting148 Item Code 3 NEG GT is selected Example To set Item Code 3 NEG GT with Non-print statusSelect either Print or Non-print status With the ← or → keyReport Item Name Table Standard Program Code Ground Total Terminal File Programming 152 On the next 153 Key Status Programming154 → keyDepress the Enter key End key depression allows Key Name Key Status Table Key Code 1 toBit No Function 1st Price 2nd Price 3rd Price Key Status Table Key Code 21 toDisc Cash KEY Amount is selected Cash Tender Key Preset Amount Setting157 Cash 1 key Amount 1000,00 is preset toCash 2 key 158DRW Warning Time is selected Drawer Warning Time Setting159 160 Example To set 30 seconds for the drawer warning timeRound TBL 1 Digit is selected Special Rounding Process Setting, 1-digit type162 Input 200, then depress the EnterRound TBL 2 Digits is selected Special Rounding Process Setting, 2-digit typeOn the next 164 Input 1200, then depress the Enter165 Input 3725, then depress the Enter keyRCT Print Buffer is selected Number of Receipt Print Buffer Line SettingOn the next 166 167 168 Serial No. SettingExample To set the serial No Verification of Programmed Data Mode Lock X or SETProgram Data Read menu SET mode