Toshiba MA-600 System Option Table, Time on Sale Receipt, Report, Program Receipt, Sale % of each

6. TERMINAL FILE PROGRAMMING

EO3-11106 6.5 System Option Programming

						System Option Table
								Standard Bit Set (auto-set by RAM Clear)
ADDRESS NO.				CONTENTS							0
	1			NON-PRINT OPTION I
BIT			ITEM		SELECTIVE STATUS		STANDARD			REMARKS
NO.								STATUS
1			Time (on Sale Receipt,	RESET		PRINT	*
			Report, Program
			Receipt)	SET		NON-PRINT
2			Sale Item Count on	RESET		PRINT	*
			each Sale Receipt	SET		NON-PRINT
3			Subtotal Amount print	RESET		PRINT	*
		by [ST] key on Receipt							NOTE 1 below
			and Journal	SET		NON-PRINT
4			-- vacant --	RESET			*
				SET
5			Customer Count for	RESET		PRINT	*
			each Department on
			Department Reports	SET		NON-PRINT			Both Bit 5 & 6 RESET:
									Prints sales % of each
			Sale % of each				*
				RESET		PRINT			Department and Group
6			Department and Group,
			on Department and	SET		NON-PRINT
			Group Reports (NOTE 2)
			Gross Profit of each	RESET		PRINT	*		“Department Gross
7									Profit Read Reports”
			Department, on						can be issued
			Department Reports	SET		NON-PRINT
									regardless of this status
8			Sales Person on Sale	RESET		PRINT	*		NOTE 3 below
			Receipt and Remote
			Slip	SET		NON-PRINT

NOTE 1: This bit status selection is also applied to the following cases in which the subtotal amount is automatically printed.

•Sale Finalization, % Operation, Amount Discount, and Special Rounding Spec.

NOTE 2: • The sale % of a department = (That Department) / (Sum of Positive Department)

(When the “Sum of Positive Department” is zero or negative, the sale % of 0% will be printed.)

•The sale % of a negative Status Department is not printed.

NOTE 3: If SET, no printing is performed on the receipt printer and the Remote Slip Printer during the salesperson entry, however, it is performed on the journal regardless of the setting.

6-22