Toshiba MA-600 manual Example To program the following Store Message, → → → → → →→ Dbl T E

6. TERMINAL FILE PROGRAMMING

EO3-11106

6.8 Store Name Message Programming

3)Example:

To program the following Store Message.

T E C S T O R E

1 3 4 3 P E A C H D R I V E

P H O N E : 8 7 - 6 4 3 7

Line No. 1

Line No. 2

Line No. 3

Line No. 4

Operation LCD Display Remarks

When the ECR is being outside a sale and in SET mode, depress the [1] or [Enter] key.

Depress the [↓] key twice.	The cursor is moved on to “3 STORE
	MESSAGE”.

Depress the [3] or [Enter] key.

The message already programmed is	While	?	is shown on the upper-right corner
displayed.	of the LCD display screen, the [?] key
	depression results in that the following
	guidance message appears on the LCD
	display.

The [Enter] key depression allows the		To program a message in a desired line,
ECR to enter the 1st line message		move the cursor there with the [↓] key then
input mode. (The [C] key depression		depress the [Enter] key.
clears the message already		Numbers of programmed characters and of
programmed.) The 1st line message is		programmable characters are displayed on
input.		the 7-segment numeric display.
	Number of programmed characters
	Number of programmable characters
The [Enter] key depression results in		When the [Enter] key is depressed, the
that the input message is entered and		message programmed in the 1st line is
displayed.		printed.
		Example of key operation)
		[→] [→] [→] [→] [→] [→][→] [Dbl] [T] [E]
		[C] [→] [S] [T] [O] [R] [E] [Enter]
The [Enter] key depression allows the		Numbers of programmed characters and of
ECR to enter the 2nd line message		programmable characters are displayed on
input mode. (The [C] key depression		the 7-segment numeric display.
clears the message already
programmed.) The 2nd line message
is input.
	(continued on the next page)
	6-57