Toshiba MA-600 manual 568, On Reports, Financial and Cashier, Daily Read Counter on Reports

6. TERMINAL FILE PROGRAMMING

EO3-11106 6.5 System Option Programming

						System Option Table
								Standard Bit Set (auto-set by RAM Clear)
ADDRESS NO.				CONTENTS							568
	11		NON-PRINT OPTION III
BIT		ITEM			SELECTIVE STATUS			STANDARD		REMARKS
NO.								STATUS
1		-- vacant --		RESET			*
				SET
2		-- vacant --		RESET			*
				SET
3		-- vacant --		RESET			*
				SET
4		-- vacant --		RESET			*
				SET
5		[C] (Clear) Key Counter		RESET		COUNT
		on Reports		SET		NON-COUNT	*
6		Financial and Cashier		RESET		PRINT
		Daily Read Counter on							NOTE 1 below
							*
		Reports		SET		NON-PRINT
7		-- vacant --		RESET			*
				SET
8		[C] (Clear) Key on		RESET		PRINT (NOTE 2 below)
		Journal		SET		NON-PRINT	*

NOTE 1: If RESET, when performing a financial read/reset or cashier read/reset operation, their respective read counter (X counter) is

printed on the report. (For details, please refer to the Table below.)				The read counter (X counter) increases by one regardless of
this bit status.
Table: X counter and Z counter print
	Daily		GT	Z Counter
	X Counter	Z Counter	X Counter
Daily Read	Printed	---	---	---
Daily Reset	Printed	Printed	---	---
GT Read	---	---	Printed	---
GT Reset	---	---	Printed	Printed

NOTE 2: The descriptor “CLEAR” (programmable) is printed on Journal every time the [C] key is operated in the REG mode to clear a numeric value or declaration key error. However, it will not be printed when the [C] key is depressed to clear an error condition. Additionally, this printing will not be recorded in the MGR or - mode. It will be performed neither on the Receipt nor Remote Slip Printer in any mode.

- - Address Nos. 12 to 16 are vacant. - -

6-28