Drawer Warning Time Setting, 159 | Toshiba MA-600 guide

6. TERMINAL FILE PROGRAMMING

EO3-11106

6.38 Drawer Warming Time Setting

6.38Drawer Warning Time Setting

This operation sets the number of seconds as the period of time for the cash drawer remaining open until the alarm buzzer is generated to warn operator to close the drawer.

CONDITION	Any time outside a sale
OPERATION	Mode Lock: SET

1)Menu Tree

2)Operation Flowchart

Main Menu

Depress [↓] five times then [Enter].

or

Depress [6].

Depress [↓] four times then [Enter].

or

Depress [5].

Input a numeriv value of time to start the drawer warning buzzer.

[End]

ECR is being outside a sale and in SET mode.

“6 OTHER” is selected.

“5 DRW WARNING TIME” is selected.

Max. 2 digits: 1 to 99 (seconds)

This programming is ended. A long receipt is issued and the display returns to Main Menu screen.

NOTES:

1.The value of 0 second cannot be set. (To cancel the drawer warning function, reset the warning option itself.)

2.After a RAM Clear, the value of 15 seconds is set as the default setting.

3.The setting here is effective only when the following are both selected in the system option programming: Address No. 27 - Bit No. 1 SET: Drawer-close compulsory

Address No. 27 - Bit No. 2 SET: Drawer warning alarm ACTIVE

4.The drawer warning error is cleared only by closing the drawer. This error cannot be cleared by turning the Mode Lock to any position.

5.The drawer warning time is processed only in REG, MGR, and – modes.

6-159

Image 179

Toshiba MA-600 manual Drawer Warning Time Setting, 159, DRW Warning Time is selected

Contents

MA-600 Series Table of Contents Verification of Programmed Data Description of Model Number Main Features Approximately 13.6Kg Height when the customer display is fully raised 351 mmMm width x 442 mm depth x 291 mm height Height including rubber feet Medium-term preserving paper Paper Roll Receipt and JournalStandard paper High-sensitive paper Remarks Indexing CapacitiesInput Item Digits Memory Type Counter or Total Basic Memory CapacitiesMemory Type Counter or Total Digits Name of Total/Counter Daily Type Financial Memory Financial Memory Credit-in-drawer Difference Cashier Memory Cashier Memory Counter Total Digits Digits Others Sum of Daily Net Sales Memory BalanceGT Grand Total = Sum of Daily GS Gross Sale Blind mode System START-UP Procedure ST Transmission Delay Timer 2 # Mode Lock Blind POL Watch Timer #ST Response Watch Timer # ST Transmission Delay Timer # RAM Clear RAM CLEAR, Data CLEAR, Status Clear Depress the following Numeric key Data Clear Status Clear Depress the AT/TL key Status Clear receipt is issued Table of Terminal File Programming Operations Operation Condition Mode Lock Rate %-/%+ Instructions for Programming Ordinary Type Keyboard Keyboard Layout Variations Flat Type Keyboard End Keyboard layout for programming Mode Lock PositionOrdinary Type Keyboard Del Rtn Dbl Enter Flat Type Keyboard Rtn Keyboard layout for Read/ResetMode Lock Position Ordinary Type Keyboard Rtn Enter Key Enter Rtn End Key Enter Rtn FunctionKey Dbl Del History Function Character Entries Character Code Standard Characters Column Code Row Code Character Code Entry Method 407 # Character Setting Operations End ? a Direct Character Entry Method Using PK-2 PLU Keyboard hardware option Key operation Description LCD display PLU Operation History ↓ EnterExample of operation Condition Required for Programming Operations 76 AT/TL Mode Lock BlindSfkc Selective Function Key Code Programming Consignment counter Sfkc TableKey Name Memory to be opened Remarks Foreign Currency 1-in-drawer 104 TRF Transfer No memory 105 to108 AMT Amount 109 RPT Repeat No memory 110 to 116 TX3/M Tax 3 Modifier 117 to Sfkc Sfkc Receipt Sample System Option Programming Programming in SET mode Operation LCD Display Remarks Programming in Blind mode System OP Time on Sale Receipt Both Bit 5 & 6 ResetDepartment, on Can be issued Department Reports System Option Table Inps 2 for the Charge Inps 1 for the ChargePosting on Remote Slip Printer REG mode Reports Zero-skip in PLU Cashier featureZero-skip in All Skipped in the report Compulsory for any PB Entry Remote Slip Print Drawer Open by Print and Issue ReceiptsCashier Sign ON/OFF Daily Read Counter on Reports 568On Reports Financial and Cashier SET Price Shift Function Consecutive No. Single-Consignment orMulti-Consignment Date Print Open/Close Add-on Tax Separate Print on VAT feature has been Receipt Note When Add-on TaxFeature is selected at Price x Rate VAT feature has been Selected Tax Type Single line spacing VAT Symbol PrintPrint order of VAT TL NET TL Single-drawer or Multi Drawer Warning AlarmDrawer Close Compulsory Non-add # Entry ResettingReset on Financial Daily Z Negative Mode No-sale Entry After SET NON-PRINT Reset Cashier Interrupt IPD or Inpd on JournalREG and MGR Modes Name Message or Store Name Logo on Receipt Date, day of week,Register No. print on Journal Selection of the Store OFF on finalizing a sale + and %-after aSubtotal within a Sale Automatic Cashier Sign Sale Total Follow Bit 2 status If both RESET, it will be OrderDate Set and Print Special Rounding on Ex 1.5% Amount Division SymbolType Amount Division Symbol Decimal Point in Item CUR 4 Foreign CUR 1 ForeignCUR 2 Foreign CUR 3 Foreign PLU Memory Process Post-issue Receipt PrintDepartment Memory Process for %- on Department Item Method Push Sfkc Keys Cashier Identifying Performed by Money DeclarationMoney Declaration is Immediately after Previous daily financial ResetConsecutive No. Print Zero-skip of PLU Data When transmitting to PC Journal Printer Narrow Printing onDisconnection Enter End Commercial Message Programming ECR to enter the 1st line message Example To program the following Commercial MessageDisplayed To program a message in a desired Programmed. The 3rd line message ECR to enter the 3rd line message Footer Message is selected Footer Message Programming Key then depress the Enter key Enter key depression results Example To program the following Footer MessageDepress the 2 or Enter key Message already programmed is Line, move the cursor there with the ↓ → a g a i n Enter → → → → → → → → → →→ → → → → → C A/a a l l Input a message in the 4th line Store Name Message Programming When Commercial Message is Reset → S T O R E Enter Example To program the following Store MessageDepress the 3 or Enter key Message already programmed is → → → → → →→ Dbl T E ECR to enter the 4th line message Input a department name Department Name Programming Department 01 is selected Example To program Food as the name of DepartmentSET mode, depress the ↓ key Depress the 2 or Enter key Depress the Enter key Group Operation LCD Display Department Group Name ProgrammingInput a department group name Example To program the following name on Department Group Dbl F R E S H Enter Department Group 1 is selectedDepartment group name already Input a cashier name Cashier Name and Status Programming SET mode, depress the ↓ key Name already programmed. Cashier 1 name is input Status input modeECR to enter the cashier 1 name input Mode. The C key depression clears Example To program Tomato as the name of PLU Code No PLU Name ProgrammingMaximum of 16 characters of PLU name is programmed here Input a PLU name C key depression clears the PLU Depress the 2 or Enter key Depress the ↓ key three timesDepress the 4 or Enter key PLU Code No is selected To be programmed with the ↑ or ↓ Salesperson Name ProgrammingEnter key Select a salesperson of which name is Salesperson 01 is selected Example To program White on Salesperson CodeDepress the ↓ key four times Depress the 5 or Enter key End key depression allows ECR to end this programming Financial ITM Name is selected After Financial ResetFinancial Report Item Name Programming Input a Financial item name Financial item name already Depress the ↓ key five timesDepress the ↓ key, then depress Item code 2 NET GT is selected NET GT NEG GT EO3-11106 Terminal File Programming Vacant Print Item Name is selected Print Line Item Name ProgrammingAnytime outside a sale Input a print line item name Item code 7 @ Item is selected Depress the ↓ key six timesDepress the 7 or Enter key Depress the ↓ key six times, then Print Line Item Name Table Thursday Friday Post-issue Receipt HeaderSunday Monday Tuesday Wednesday Consignment NET Total Fixed Data Preset DataDepartment Group Cashier Symbol Salesperson Symbol Remarks Display Item Name is selected Display Item Name ProgrammingInput a display item name Slip Printer Connection Check Display Item Name TableApplication Standard Program Code Item code 3 Total is selected Depress the ↓ key seven timesDepress the 8 or Enter key Depress the ↓ key twice, then Display Name #003 Balance DUE Error Item Name is selected Error Item Name ProgrammingInput an error item name Depress the 9 or Enter key Error Code 3 ManagerRequired is selected C key depression clears the error Depress the ↓ key eight times Content or Cause of Error Standard Program Limit Over Warning Endorsement Print Compulsory ErrorJournal Paper Retainer Open Printer Head Temperature Error Printer Head Voltage Error 124 125 ST Key Entry Compulsory error120 121 Negative Balance Error 122 123 100 101 200 Z Report Name is selected Read/Reset Report Name ProgrammingInput an X/Z report name Report No Xprofit is Depress the ↓ key nine timesDepress the 0 or Enter key Depress the ↓ key twenty times, then Report Type Standard Program Zone PLU Department Gross ProfitHourly Range All Department All Media Sales and Cash-in Drawer All PLU F I N C a L + D P Financial + All Department Enforced Clear of Hold Condition A N C E L Condition Operation Department Table Programming Positive or Negative Department Single-item or Itemized Receipt €4,00 Allows any amount equal to or smaller than 39,99Prohibits any amount smaller than 4,00 €40,00 See Note below Input 01 or 1, then depress Setting menuDepress the Enter key to select Department VAT/Add-on tax statuses 1 and 2 are Setting with the ↓ or ↑ keyMove the cursor on to a desired status Depress the → key then the Enter Long receipt is issued and the display Example To preset the price €1,00 on Department 1 Food Department Preset Price Setting or Changing Department 1 Food Input 100 for the preset priceEnd key depression allows the ECR to end this setting Digit Limitprice is selected Department Listing Capacity LC ProgrammingInput a Lalo value Xxxxxxx Enter On the next 107 Example To program 100000 for Halo and 10 for LaloInput 100000, then depress the Enter Halo Lalo End key depression allows KEY Sticker Print is selected Key Sticker PrintingFor printing part of department names On the next 110 Example To print all department names ALL DP is selected Individual DP is selected To print part of department namesMove the cursor on to a desired ECR to end this operation PLU Table Programming Menu Tree Operation Flowchart Enter 01 to Linked Department 1 is set On the next 115 Input 0010 or 10, then depressPLU key PLU Code 0010 is set Input 01 or 1, then depress PLU key depression completes Preset Price €1,00 is set Input 120, then depress the EnterInput 100, then depress the Enter VAT statuses 1 and 2 are set SET mode, depress the ↓ key Twice Depress Depress ↓ then EnterDepress Depress ↓ three times then Enter Depress Input a PLU code to be deleted Indiv Input 0501 or 501, then depressPLU Code 0501 is specified End key depression allows Depress the ALL Void key PLU Preset Price Setting or Changing On the next 121 Depress the 3 or Enter key Depress the ↓ keyDepress the 2 or Enter key Depress the ↓ key 022ND PRICE. Then, input 540 Depress the Enter key As the 3rd preset price remainsMake sure the cursor is shown on 01PRICE. Then, input 315 Assign to Keyboard is selected PLU Preset-Code Key SettingInput a desired key location code Key Location Code Keyboard To assign PLU Code 1111 on the PK-2 keyboard ECR to end this settingInput 55, then depress the Enter key Key Location Code 55 is set Depress the ↓ key Depress the 2 or Enter key RATE, Limit Amount is selected %- Rate %-/%+ is selected 26 %+ and %- Preset Rate SettingInput a Preset Rate RATE, Limit Amount is selected VAT or Add-on Tax Rate Setting Three times Depress the 4 or Enter key Example To set the following VAT rate VAT1………10%SET mode, depress the ↓ key RATE, Limit Amount is selected CUR Exchange Rate is selected Foreign Currency Exchange Rate Setting On the next 133 CUR1 CUR2Dollar Japanese Yen €1,00 $1,20 ¥137,74 Euro Cent 3774 yen Resetting a Foreign Currency Rate Once Set RATE, Limit Amount is selected Disc AMT Limit is selected Negative Amount Key Limit Amount Setting Limit amount of the VND CPN 10.0020.00 Input 1000, then depress the Enter On the next 137 Time Setting or AdjustmentExample To set time 115 p.m 138 Date Setting or Adjustment 139 Example To set Date Monday 31 OctoberInput On the next 140 Store/Register No. SettingExample To set the Register No. of this ECR 141 From the previous Operation LCD Display RemarksDepress the ↓ key twice Input Store/Register No is set End key depression allows After Hourly Range Reset Hourly Range Table Setting 1200 1500 Example To set the following hourly range tableUntil 800 1200 On the next 144 Hourly Range Table Resetting Procedure Reset is selected Tone Volume Setting 147 Tone Volume LOW is selectedDepress the ↑ key Report Print Item is selected Report Item Print/Non-Print Setting148 With the ← or → key Example To set Item Code 3 NEG GT with Non-print statusItem Code 3 NEG GT is selected Select either Print or Non-print status Report Item Name Table Standard Program Code Ground Total Terminal File Programming 152 On the next 153 Key Status Programming 154 → keyDepress the Enter key End key depression allows Key Name Key Status Table Key Code 1 toBit No Function 1st Price 2nd Price 3rd Price Key Status Table Key Code 21 toDisc Cash KEY Amount is selected Cash Tender Key Preset Amount Setting157 158 Amount 1000,00 is preset toCash 1 key Cash 2 key DRW Warning Time is selected Drawer Warning Time Setting159 160 Example To set 30 seconds for the drawer warning time Round TBL 1 Digit is selected Special Rounding Process Setting, 1-digit type 162 Input 200, then depress the Enter Round TBL 2 Digits is selected Special Rounding Process Setting, 2-digit type On the next 164 Input 1200, then depress the Enter 165 Input 3725, then depress the Enter key RCT Print Buffer is selected Number of Receipt Print Buffer Line SettingOn the next 166 167 168 Serial No. Setting Example To set the serial No Verification of Programmed Data Mode Lock X or SET Program Data Read menu SET mode