PLU Name Programming, Input a PLU name | Toshiba MA-600 instruction

6. TERMINAL FILE PROGRAMMING

EO3-11106 6.12 PLU Name Programming

6.12PLU Name Programming

A maximum of 16 characters of PLU name is programmed here.

CONDITION	Any time outside a sale
OPERATION	Mode Lock: SET

1)Menu Tree

2)Operation Flowchart

Main Menu

Depress [↓] then [Enter].

or

Depress [2].

Depress the [↓] key three times then

[Enter].

or

Depress [4].

Select a PLU of which name is to be programmed with the [↑] or [↓] key.

[Enter]

Input a PLU name.

[Enter]

[End]

ECR is being outside a sale and in SET mode.

“2 NAMES” for various name programming is selected.

“4 PLU (ITEM NO.) NAME” is selected.

The PLU name already programmed is displayed.

The ECR enters character input mode.

A maximum of 16 one-byte or 8 two-byte characters are input.

The PLU name is entered and printed.

This programming is ended. A long receipt is issued and the display returns to Main Menu screen.

NOTE: A maximum of 16 one-byte characters or 8 two-byte characters can be entered. A combination of both types is also available.

3)Example

To program “Tomato” as the name of PLU Code No. 0001.

Operation

LCD Display

When the ECR is being outside a sale and in SET mode, depress the [↓] key.

Remarks

The cursor is moved on to “2 NAMES”.

(continued on the next page)

6-66

Image 86

Toshiba MA-600 manual PLU Name Programming, Maximum of 16 characters of PLU name is programmed here, Input a PLU name

Contents

MA-600 Series Table of Contents Verification of Programmed Data Main Features Description of Model Number Height including rubber feet Height when the customer display is fully raised 351 mmMm width x 442 mm depth x 291 mm height Approximately 13.6Kg High-sensitive paper Paper Roll Receipt and JournalStandard paper Medium-term preserving paper Remarks Indexing CapacitiesInput Item Digits Memory Type Counter or Total Basic Memory CapacitiesMemory Type Counter or Total Digits Financial Memory Name of Total/Counter Daily Type Financial Memory Credit-in-drawer Difference Cashier Memory Cashier Memory Others Counter Total Digits Digits Sum of Daily Net Sales Memory BalanceGT Grand Total = Sum of Daily GS Gross Sale System START-UP Procedure Blind mode ST Transmission Delay Timer # Mode Lock Blind POL Watch Timer #ST Response Watch Timer # ST Transmission Delay Timer 2 # RAM CLEAR, Data CLEAR, Status Clear RAM Clear Data Clear Depress the following Numeric key Depress the AT/TL key Status Clear receipt is issued Status Clear Operation Condition Mode Lock Table of Terminal File Programming Operations Instructions for Programming Rate %-/%+ Keyboard Layout Variations Ordinary Type Keyboard Rtn Dbl Enter Keyboard layout for programming Mode Lock PositionOrdinary Type Keyboard Del Flat Type Keyboard End Ordinary Type Keyboard Rtn Enter Keyboard layout for Read/ResetMode Lock Position Flat Type Keyboard Rtn Key Enter Rtn End Key Enter Rtn FunctionKey Dbl Del History Function Character Entries Character Code Entry Method Character Code Standard Characters Column Code Row Code Character Setting Operations 407 # Direct Character Entry Method End ? a Using PK-2 PLU Keyboard hardware option Key operation Description LCD display PLU Operation History ↓ EnterExample of operation Condition Required for Programming Operations 76 AT/TL Mode Lock BlindSfkc Selective Function Key Code Programming Consignment counter Sfkc TableKey Name Memory to be opened Remarks 116 TX3/M Tax 3 Modifier 117 to 104 TRF Transfer No memory 105 to108 AMT Amount 109 RPT Repeat No memory 110 to Foreign Currency 1-in-drawer Sfkc Receipt Sample Sfkc Programming in SET mode System Option Programming Operation LCD Display Remarks Programming in Blind mode System OP System Option Table Both Bit 5 & 6 ResetDepartment, on Can be issued Department Reports Time on Sale Receipt Printer Inps 1 for the ChargePosting on Remote Slip Inps 2 for the Charge REG mode Skipped in the report Cashier featureZero-skip in All Reports Zero-skip in PLU Remote Slip Print Compulsory for any PB Entry Drawer Open by Print and Issue ReceiptsCashier Sign ON/OFF Financial and Cashier 568On Reports Daily Read Counter on Reports Price Shift Function SET Date Print Single-Consignment orMulti-Consignment Consecutive No. Add-on Tax Open/Close Price x Rate VAT feature has been Selected Tax Type When Add-on TaxFeature is selected at Separate Print on VAT feature has been Receipt Note NET TL VAT Symbol PrintPrint order of VAT TL Single line spacing Compulsory Drawer Warning AlarmDrawer Close Single-drawer or Multi No-sale Entry After ResettingReset on Financial Daily Z Negative Mode Non-add # Entry SET NON-PRINT Reset Cashier Interrupt IPD or Inpd on JournalREG and MGR Modes Selection of the Store Date, day of week,Register No. print on Journal Name Message or Store Name Logo on Receipt Automatic Cashier Sign + and %-after aSubtotal within a Sale OFF on finalizing a sale Special Rounding on Follow Bit 2 status If both RESET, it will be OrderDate Set and Print Sale Total Decimal Point in Item Amount Division SymbolType Amount Division Symbol Ex 1.5% CUR 3 Foreign CUR 1 ForeignCUR 2 Foreign CUR 4 Foreign Process for %- on Department Item Post-issue Receipt PrintDepartment Memory PLU Memory Process Cashier Identifying Method Push Sfkc Keys Performed by Money DeclarationMoney Declaration is Immediately after Previous daily financial ResetConsecutive No. Print When transmitting to PC Zero-skip of PLU Data Journal Printer Narrow Printing onDisconnection Commercial Message Programming Enter End To program a message in a desired Example To program the following Commercial MessageDisplayed ECR to enter the 1st line message ECR to enter the 3rd line message Programmed. The 3rd line message Footer Message Programming Footer Message is selected Line, move the cursor there with the ↓ Example To program the following Footer MessageDepress the 2 or Enter key Message already programmed is Key then depress the Enter key Enter key depression results → a g a i n Enter → → → → → → → → → →→ → → → → → C A/a a l l Store Name Message Programming Input a message in the 4th line When Commercial Message is Reset → → → → → →→ Dbl T E Example To program the following Store MessageDepress the 3 or Enter key Message already programmed is → S T O R E Enter ECR to enter the 4th line message Department Name Programming Input a department name Depress the Enter key Example To program Food as the name of DepartmentSET mode, depress the ↓ key Depress the 2 or Enter key Department 01 is selected Example To program the following name on Department Group Department Group Name ProgrammingInput a department group name Group Operation LCD Display Dbl F R E S H Enter Department Group 1 is selectedDepartment group name already Cashier Name and Status Programming Input a cashier name SET mode, depress the ↓ key Mode. The C key depression clears Status input modeECR to enter the cashier 1 name input Name already programmed. Cashier 1 name is input Input a PLU name PLU Name ProgrammingMaximum of 16 characters of PLU name is programmed here Example To program Tomato as the name of PLU Code No PLU Code No is selected Depress the 2 or Enter key Depress the ↓ key three timesDepress the 4 or Enter key C key depression clears the PLU Select a salesperson of which name is Salesperson Name ProgrammingEnter key To be programmed with the ↑ or ↓ Depress the 5 or Enter key Example To program White on Salesperson CodeDepress the ↓ key four times Salesperson 01 is selected End key depression allows ECR to end this programming Input a Financial item name After Financial ResetFinancial Report Item Name Programming Financial ITM Name is selected Item code 2 NET GT is selected Depress the ↓ key five timesDepress the ↓ key, then depress Financial item name already NET GT NEG GT EO3-11106 Terminal File Programming Vacant Input a print line item name Print Line Item Name ProgrammingAnytime outside a sale Print Item Name is selected Depress the ↓ key six times, then Depress the ↓ key six timesDepress the 7 or Enter key Item code 7 @ Item is selected Print Line Item Name Table Tuesday Wednesday Post-issue Receipt HeaderSunday Monday Thursday Friday NET Total Consignment Fixed Data Preset DataDepartment Group Cashier Symbol Salesperson Symbol Remarks Display Item Name is selected Display Item Name ProgrammingInput a display item name Slip Printer Connection Check Display Item Name TableApplication Standard Program Code Depress the ↓ key twice, then Depress the ↓ key seven timesDepress the 8 or Enter key Item code 3 Total is selected Display Name #003 Balance DUE Error Item Name is selected Error Item Name ProgrammingInput an error item name Depress the ↓ key eight times Error Code 3 ManagerRequired is selected C key depression clears the error Depress the 9 or Enter key Content or Cause of Error Standard Program Printer Head Voltage Error Endorsement Print Compulsory ErrorJournal Paper Retainer Open Printer Head Temperature Error Limit Over Warning 100 101 ST Key Entry Compulsory error120 121 Negative Balance Error 122 123 124 125 200 Z Report Name is selected Read/Reset Report Name ProgrammingInput an X/Z report name Depress the ↓ key twenty times, then Depress the ↓ key nine timesDepress the 0 or Enter key Report No Xprofit is Report Type Standard Program All Media Sales and Cash-in Drawer All PLU Department Gross ProfitHourly Range All Department Zone PLU Enforced Clear of Hold Condition A N C E L F I N C a L + D P Financial + All Department Department Table Programming Condition Operation Single-item or Itemized Receipt Positive or Negative Department €40,00 Allows any amount equal to or smaller than 39,99Prohibits any amount smaller than 4,00 €4,00 Department Setting menuDepress the Enter key to select See Note below Input 01 or 1, then depress Depress the → key then the Enter Setting with the ↓ or ↑ keyMove the cursor on to a desired status VAT/Add-on tax statuses 1 and 2 are Long receipt is issued and the display Department Preset Price Setting or Changing Example To preset the price €1,00 on Department 1 Food Department 1 Food Input 100 for the preset priceEnd key depression allows the ECR to end this setting Xxxxxxx Enter Department Listing Capacity LC ProgrammingInput a Lalo value Digit Limitprice is selected Halo Example To program 100000 for Halo and 10 for LaloInput 100000, then depress the Enter On the next 107 Lalo End key depression allows KEY Sticker Print is selected Key Sticker PrintingFor printing part of department names Example To print all department names On the next 110 ALL DP is selected ECR to end this operation To print part of department namesMove the cursor on to a desired Individual DP is selected Menu Tree Operation Flowchart PLU Table Programming Enter 01 to PLU Code 0010 is set Input 01 or 1, then depress Input 0010 or 10, then depressPLU key Linked Department 1 is set On the next 115 VAT statuses 1 and 2 are set Preset Price €1,00 is set Input 120, then depress the EnterInput 100, then depress the Enter PLU key depression completes Depress Input a PLU code to be deleted Depress Depress ↓ then EnterDepress Depress ↓ three times then Enter SET mode, depress the ↓ key Twice Indiv Input 0501 or 501, then depressPLU Code 0501 is specified End key depression allows Depress the ALL Void key PLU Preset Price Setting or Changing On the next 121 Depress the 3 or Enter key Depress the ↓ keyDepress the 2 or Enter key Depress the ↓ key 01PRICE. Then, input 315 Depress the Enter key As the 3rd preset price remainsMake sure the cursor is shown on 022ND PRICE. Then, input 540 Assign to Keyboard is selected PLU Preset-Code Key SettingInput a desired key location code Key Location Code Keyboard Key Location Code 55 is set ECR to end this settingInput 55, then depress the Enter key To assign PLU Code 1111 on the PK-2 keyboard Depress the ↓ key Depress the 2 or Enter key RATE, Limit Amount is selected %- Rate %-/%+ is selected 26 %+ and %- Preset Rate SettingInput a Preset Rate RATE, Limit Amount is selected VAT or Add-on Tax Rate Setting Three times Depress the 4 or Enter key Example To set the following VAT rate VAT1………10%SET mode, depress the ↓ key Foreign Currency Exchange Rate Setting RATE, Limit Amount is selected CUR Exchange Rate is selected On the next 133 CUR1 CUR2Dollar Japanese Yen €1,00 $1,20 ¥137,74 Euro Cent 3774 yen Resetting a Foreign Currency Rate Once Set Negative Amount Key Limit Amount Setting RATE, Limit Amount is selected Disc AMT Limit is selected Input 1000, then depress the Enter 10.0020.00 Limit amount of the VND CPN On the next 137 Time Setting or AdjustmentExample To set time 115 p.m Date Setting or Adjustment 138 139 Example To set Date Monday 31 OctoberInput On the next 140 Store/Register No. SettingExample To set the Register No. of this ECR Input Store/Register No is set End key depression allows From the previous Operation LCD Display RemarksDepress the ↓ key twice 141 Hourly Range Table Setting After Hourly Range Reset 800 1200 Example To set the following hourly range tableUntil 1200 1500 Hourly Range Table Resetting Procedure On the next 144 Reset is selected Tone Volume Setting 147 Tone Volume LOW is selectedDepress the ↑ key Report Print Item is selected Report Item Print/Non-Print Setting148 Select either Print or Non-print status Example To set Item Code 3 NEG GT with Non-print statusItem Code 3 NEG GT is selected With the ← or → key Report Item Name Table Standard Program Code Ground Total Terminal File Programming 152 Key Status Programming On the next 153 154 → keyDepress the Enter key End key depression allows Key Name Key Status Table Key Code 1 toBit No Function 1st Price 2nd Price 3rd Price Key Status Table Key Code 21 toDisc Cash KEY Amount is selected Cash Tender Key Preset Amount Setting157 Cash 2 key Amount 1000,00 is preset toCash 1 key 158 DRW Warning Time is selected Drawer Warning Time Setting159 Example To set 30 seconds for the drawer warning time 160 Special Rounding Process Setting, 1-digit type Round TBL 1 Digit is selected Input 200, then depress the Enter 162 Special Rounding Process Setting, 2-digit type Round TBL 2 Digits is selected Input 1200, then depress the Enter On the next 164 Input 3725, then depress the Enter key 165 RCT Print Buffer is selected Number of Receipt Print Buffer Line SettingOn the next 166 167 Serial No. Setting 168 Example To set the serial No Mode Lock X or SET Verification of Programmed Data SET mode Program Data Read menu