Toshiba MK6017MAP manual Attribute Name

360014937

Byte		Description
0		Attribute ID number 01 - FFh
1-2		Status flag
		bit 0 (pre-failure/advisory bit)
		bit 0 = 0: If attribute value is less than the threshold, the drive is in advisory
		condition.
		Product life period may expired.
		bit 0 = 1: If attribute value is less than the threshold, the drive is in pre-failure
		condition. The drive may have failure.
		bit 1 (on-line data collection bit)
		bit 1= 0: Attribute value shall be changed during off-line data collection
		operation.
		bit 1= 1: Attribute value shall be changed during normal operation.
		bit 2 (Performance Attribute bit)
		bit 3 (Error rate attribute bit)
		bit 4 (Event Count Attribute bit)
		bit 5 (Self-Preserving Attribute bit)
		bit 6-15 Reserved
3		Attribute value 01h-FDh
		00h, FEh, FFh = Not in use
		01h = Minimum value
		64h = Initial value
		Fdh = Maximum value
4		Worst Ever normalized Attribute Value
		( valid values from 01h-FEh )
5-10		Raw Attribute Value
		Attribute specific raw data
		( FFFFFFh - reserved as saturated value )
11		Reserved ( 00h )
ID	Attribute Name

0Indicates that entry in the data structure is not used

1 Read Error Rate

2 Throughput Performance

3 Spin Up Time

4 Start/Stop Count

5 Reallocated Sector Count

8 Seek Time performance

9 Power-On hours Count

10 Spin Retry Count

12 Drive Power Cycle Count

199 CRC Error Count

220 Disk Shift

222 Loaded Hours

223 Load Retry Count

224 Load Friction

225 Load Cycle Count

226 Load in Time

228 Power-off Retract Count

240 Write Head

Copyright ©2000 Toshiba corporation. All rights reserved.

- 594 -