Toshiba MK6017MAP manual Self-test log sector

360014937

10.8.33.6.7 Data structure checksum

The data structure checksum is the two's complement of the sum of the first 511 bytes in the data structure. Each byte shall be added with unsigned arithmetic, and overflow shall be ignored. The sum of all 512 bytes will be zero when the checksum is correct. The checksum is placed in byte 511.

10.8.33.6.8 Self-test log sector

The following Table defines the 512 bytes that make up the SMART self-test log sector.

	Self-test log data structure
Byte	Descriptions
0-1	Self-test log data structure revision number
2-25	First descriptor entry
26-49	Second descriptor entry
.....	............
482-505	Twenty-first descriptor entry
506-507	Vendor specific
508	Self-test index
509-510	Reserved
511	Data structure checksum

10.8.33.6.9 Self-test log data structure revision number

The value of the self-test log data structure revision number is set to 0001h.

10.8.33.6.10 Self-test log descriptor entry

This log is viewed as a circular buffer. The first entry shall begin at byte 2, the second entry shall begin at byte 26, and so on until the twenty-second entry, that shall replace the first entry. Then, the twenty-third entry shall replace the second entry, and so on. If fewer than 21 self-tests have been performed by the device, the unused descriptor entries shall be filled with zeroes.

The content of the self-test descriptor entry is shown in the following Table.

	Self-test log descriptor entry
Byte	Descriptions
n	Content of the Sector Number
n+1	Content of the self-test execution status
n+2	Life timestamp (least significant byte).
n+3	Life timestamp (most significant byte).
n+4	Content of the self-test failure checkpoint
n+5	Failing LBA(least significant byte).
n+6	Failing LBA(next least significant byte).
n+7	Failing LBA(next most significant byte).
n+8	Failing LBA(most significant byte).
n+9 - n+23	Vendor specific.

Content of the Sector Number register shall be the content of the Sector Number register when the nth self-test subcommand was issued.

Content of the self-test execution status byte shall be the content of the self-test execution status byte when the nth self-test was completed

Life timestamp shall contain the power-on lifetime of the device in hours when the nth self-test subcommand was completed.

Content of the self-test failure checkpoint byte shall be the content of the self-test failure checkpoint byte when the nth self-test was completed.

Copyright ©2000 Toshiba corporation. All rights reserved.

- 604 -