Toshiba PORTG M500 4.4 Bridge media

4.4 Bridge media 4 Replacement Procedures
4.4 Bridge media
Removing the Bridge media
To remove the Bridge media, follow the steps below and refer to Figure 4-3.
CAUTION: Before you remove the Bridge media, refer to the card’s documentation and
to your operating system documentation for proper procedures and
precautions.
1. Push the Bridge media in and release it to pop the card out.
2. Grasp the Bridge media and pull it out.
(For an instance, SD card is described in the figure 4-3.)
Bridge media
(SD card)
Figure 4-3 Removing the Bridge media (SD card)
Installing the Bridge media
To install the Bridge media, follow the steps below and refer to Figure 4-3.
1. Insert the Bridge media in the card slot.
2. Push it carefully to ensure a firm connection.
PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-11