Toshiba PORTG M500 4.20 Modem jack / Wireless communication SW

4 Replacement Procedures 4.20 Modem jack / Wireless communication SW
4.20 Modem jack / Wireless communication SW
To remove the Modem jack / Wireless communication SW, follow the steps below and refer
to Figure 4-29 to 4-30.
1. Remove the following screw and the Modem jack holder.
• M2.5×4B FLAT HEAD screw ×1
2. Remove the Modem jack stuck to the base assembly with a double sided tape from
the slot.
3. Open the insulator and remove the Modem jack cable from the slot of the base
assembly.
Modem jack holder
Modem jack
Insulator
M2.5×4B FLAT HEAD
Modem jack cable
Figure 4-29 Removing the Modem jack
4-50 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)