4.6 Optical drive 4 Replacement Procedures
4.6 Optical drive
Removing the Optical drive
To remove the optical drive, follow the steps below and refer to Figure 4-6 and 4-7.
CAUTION: Do not put fingers in the optical drive. It may cause injury.
1. Remove the following two screws securing the slim select.
• M2.5×4B FLAT HEAD screw ×1
• M2.5×16B FLAT HEAD screw ×1
2. While sliding the hook in the direction of the arrow in the figure below, remove the
optical drive (from connector on the system board).
M2.5×4B FLAT HEAD
Optical drive
M2.5
×
16B FLAT HEAD
Hook
Figure 4-6 Removing the optical drive
PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-15