4 Replacement Procedures 4.16 Internal microphone
4.16 Internal microphone
Removing the Internal microphone
To remove the internal microphone, follow the steps below and refer to Figure 4-22.
1. Peel off the glass tape and take out the microphone holder.
2. Disconnect the microphone cable from the connector CN6050 on the system board
and take out the internal microphone from the slot.
Microphone
holder
Glass ta
p
e
Internal
microphone
CN6050
Figure 4-22 Removing the internal microphone
4-40 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)