4.16 Internal microphone 4 Replacement Procedures
Installing the Internal microphone
To install the internal microphone, follow the steps below and refer to Figure 4-22.
1. Install the internal microphone and microphone holder to the slot of the front panel.
CAUTION: When installing the microphone, the projection of the microphone shall
contact the guide of the base assembly as shown in the following figure.
Pro
j
ection
Guide
Micro
p
hone
2. Connect the microphone cable to the connector CN6050 on the system board
3. Stick the glass tape on the microphone cable.
PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-41