Toshiba PORTG M500 4.13 Bluetooth module

4 Replacement Procedures 4.13 Bluetooth module
4.13 Bluetooth module
Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below and refer to Figure 4-19.
1. Remove the following screws to remove the Bluetooth module.
• M2×4B FLAT HEAD screw ×1
2. Disconnect the Bluetooth cable from the connector CN4400 on the system board.
3. Disconnect the Bluetooth cable and Bluetooth antenna cable from the connector on
the Bluetooth module.
Bluetooth module
Bluetooth antenna cable
Bluetooth cable
CN4400
M2×4B FLAT HEAD
Figure4-19 Removing the Bluetooth module
4-34 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)