Toshiba PORTG M500 4.11 Touch pad

4 Replacement Procedures 4.11 Touch pad
4.11 Touch pad
Removing the Touch pad
To remove the touch pad, follow the steps below and refer to Figure 4-16.
1. Remove the following screws securing the touch pad assembly.
• M2×4B BIND screw ×4
2. Remove the touch pad cover and touch pad (fixed with the double sided tape).
3. Peel off the double-sided tape that prevents a waterdrop from entering the computer.
4. Remove the fingerprint sensor cable on the touch pad.
5. Open the insulator and disconnect touch pad cable from the touch pad assembly.
M2×4B BIND
M2×4B BIND
Touch pad cover
Touch pad
Touch pad cable
Fingerprint sensor cable
Insulator
Double-sided tape
Figure 4-16 Removing the touch pad assembly
4-30 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)