Toshiba PORTG M500 4.22 HDD cable/PC card slot

4.22 HDD cable/PC card slot 4 Replacement Procedures
4 Replacement Procedures
4.22 HDD cable/PC card slot
Removing the HDD cable/PC card slot
To remove the HDD cable/PC card slot, follow the steps below and refer to Figure 4-36 and
4-37.
1. Lift up the HDD cable from the slot of the HDD cable holder and remove the
following screw.
• M2×4B BIND screw ×1
2. Remove HDD cable from the connector CN1850 on the system board.
3. Remove the HDD cable holder.
HDD cable holder
HDD cable
CN1850
M2×4B BIND
Figure 4-36 Removing the HDD cable
PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-57