Toshiba PORTG M500 4.28 Battery slider

4 Replacement Procedures 4.28 Battery slider
4.28 Battery slider
Removing the Battery slider
To remove the battery slider, follow the steps below and refer to Figure 4-48.
1. Release the latches of the battery sliders (left and right) and remove the slider caps
from the bottom of the computer.
2. Take out the battery sliders from the base assembly.
Battery slider
Latch
Latch
Latch
Figure 4-48 Removing the battery slider
Installing the Battery slider
To install the Battery slider, follow the steps below and refer to Figure 4-48.
1. Install the springs to the battery sliders and set them to the base assembly.
2. Install the slider caps to the base assembly from the bottom of the computer.
4-72 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)