Toshiba PORTG M500 4.14 Wireless LAN card

4 Replacement Procedures 4.14 Wireless LAN card
4.14 Wireless LAN card
Removing the Wireless LAN card
To remove the wireless LAN card, follow the steps below and refer to Figure 4-20.
1. Peel off the glass tape.
2. Disconnect the wireless LAN antenna cables (black and white) from the wireless
LAN card using an antenna coaxial cable disconnector.
3. Remove the following screws and wireless LAN card cover.
• M2×4B BIND screw ×1
• Security torx screw or M2×4B BIND screw ×1
NOTE: In models with 11ch type of 802.11 a/b/g wireless LAN card, the wireless LAN
card cover and security torx screw are used.
4. With grasping both the sides, disconnect the wireless LAN card from the connector
CN2600 on the system board.
Security torx or
M2x4B BIND
Glass tape
Wireless LAN antenna
cables
Wireless LAN card
CN2600
Wireless LAN card cover
M2x4B BIND
Figure 4-20 Removing the wireless LAN card
4-36 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)