4 Replacement Procedures 4.18 Harness holder / LAN cable
Installing the Harness holder / LAN cable
To install the Harness holder / LAN cable, follow the steps below and refer to Figure 4-24
and 4-25.
1. Install the LAN jack into the slot.
2. Pass the LCD cable and LAN cable in the guide of the harness holder and install the
harness holder and secure it with the following screw.
• M2.5×4B FLAT HEAD screw ×1
CAUTION: When passing the LCD cable and LAN cable, refer to the following figure.
Harness holder
LCD cable
LAN cable
3. Connect the LCD cable and LAN cable to the connectors CN5000 and CN4100 on
the system board.
4-46 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)