Toshiba PORTG M500 4.18 Harness holder / LAN cable

4 Replacement Procedures 4.18 Harness holder / LAN cable
4.18 Harness holder / LAN cable
To remove the Harness holder / LAN cable, follow the steps below and refer to Figure 4-24
and 4-25.
1. Disconnect the LCD cable and LAN cable from the connectors CN5000 and
CN4100 on the system board.
2. Remove the following screw securing the harness holder.
• M2.5×4B FLAT HEAD screw ×1
LCD cable
LAN cable
CN5000
CN4100
M2.5×4B FLAT HEAD
Figure 4-24 Removing the Harness holder / LAN cable (1)
4-44 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)