4.11 Touch pad 4 Replacement Procedures
PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-31
Installing the Touch pad
To install the touch pad, follow the steps below and refer to Figure 4-16.
1. Open the insulator and connect the touch pad cable to the connector on the touch
pad assembly.
2. Seat the fingerprint sensor cable on the touch pad.
3. Stick a new double-sided tape in place.
CAUTION: Do not reuse the removed double-sided tape.
4. Install a new touch pad to the slot and touch pad cover on it.
CAUTION: Do not reuse the removed touch pad.
5. Secure the touch pad assembly with the following screws.
• M2×4B BIND screw ×4