4.10 Fingerprint sensor board 4 Replacement Procedures
PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-29
Installing the Fingerprint sensor board
To install the fingerprint sensor board, follow the steps below and refer to Figure 4-15.
1. Connect the fingerprint sensor cable to the connector on the fingerprint sensor
board.
2. Stick a new double-sided tape in place and install the fingerprint sensor board
while inserting it under the guides.
CAUTION: Do not reuse the removed double-sided tape.
3. Place the bracket while sliding it under the guides and inserting the slit into the
guide.