Toshiba PORTG M500 4.10 Fingerprint sensor board

4 Replacement Procedures 4.10 Fingerprint sensor board
4.10 Fingerprint sensor board
Removing the Fingerprint sensor board
To remove the fingerprint sensor board, follow the steps below and refer to Figure 4-15.
1. Lift up the hook and remove the bracket while sliding it in the direction of arrow in
the figure below.
2. Remove the fingerprint sensor board fixed with the double-sided tape and peel off
the tape that prevents a waterdrop from entering the computer.
3. Disconnect the fingerprint sensor cable from the connector on the fingerprint sensor
board.
Fingerprint sensor board
Fingerprint sensor cable
Bracket Hook
Guide
Guide
Double-sided tape
Figure 4-15 Removing the fingerprint sensor board
4-28 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)