Toshiba PORTG M500 4.9 Cover FAT assembly

4.9 Cover FAT assembly 4 Replacement Procedures
4 Replacement es
4.9 Cover FAT assembly
Procedur
Removing the Cover FAT assembly
To remove the Cover FAT assembly, follow the steps below and refer to Figure 4-11 to 4-14.
1. Peel off the insulator that prevents a waterdrop from entering the computer and
disconnect the SW membrane cable from the connector CN3260 on the system
board.
2. Peel off the insulator that prevents a waterdrop from entering the computer and
disconnect the touch pad cable and fingerprint sensor cable from the connector
CN3240 and CN9520 on the system board.
Insulator
SW membrane cable
CN3260
CN9520
Fingerprint
sensor cable
Touch pad cable
CN3240
Insulator
Figure 4-11 Removing the Cover FAT assembly (1)
PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-23