3 Tests and Diagnostics 3.30 SETUP
3-100 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)
(f) Beep Volume
This option selects the volume of beep (Warning). “OFF”, “Low”, “Medium”
(Default) or “High” can be selected. If a memory module that does not comply
with the standards, the computer beeps at maximum volume.
(g) Diagnostic Mode
This option sets whether the BIOS Setup Diagnostic test is enabled.
Disabled The Diagnostic test is disabled. (Default)
Enabled The Diagnostic test is enabled.
(h) Language During Bootup
This option selects the language during bootup. This message appears only on
the model for TCL (Canada).
English The message is displayed in English. (Default)
French The message is displayed in French.
8. Configuration
This option displays the configuration method.
(a) Device Config.
The devices are initialized when the PNP OS loads.
Setup by OS First, devices necessary for loading the OS will be
initialized. After the PNP OS loads, the OS will
initialize other devices. In this case, setup of PC Cards
will be fixed to “Auto-Selected” and cannot be
changed. (Default)
All Devices All devices will be initialized.
If you are using an OS that does not have PNP capacity, select “All Devices.”
The Display shows the following message:
Device Config. = All Devices