TOSHIBA Network Camera - IK-WB15A - SDK (Ver 1.00.SC)
(1)List item number
(2)Type of alarm list exalarm … Alarm In motion …. Motion Detection
(3)List recoding date/time (ASCII time)
When a list is to be output or when a list is being output, an error may occur and the list output may be stopped halfway. In this case, a status to notify the error is output after the last list.
A) case 1 | B) case 2 |
20 OK\r\n | 20 OK\r\n |
\r\n | \r\n |
\r\n | |
60 FailAction\r\n | |
\r\n |
|
60 FailAction\r\n |
|
* In both cases of success and failure, the format is not the HTML format.
2) When at type=RemoveAll/RemoveSpan
Code | Status |
20 | OK |
31InvalidEntry
32InvalidValue
Code | Status |
60 | FailAction |
15.1.4Example
1)http://10.1.0.1/api/wblistalarm.cgi?type=Show
2)http://10.1.0.1/api/wblistalarm.cgi?type=RemoveAll
3)http://10.1.0.1/api/wblistalarm.cgi?type=RemoveSpan&StartDT=20050112000000&EndDT=20050124235959
15.1.5Notes
1)The relation between StartDT and EndDT at type= RemoveSpan should be (StartDT <= EndDT) and both should be of the yyymmddHHMMSS format.
2)At type=RemoveAll and type=RemoveSpan, the corresponding list is immediately deleted without confirmation.
3)When OpeLog=No is entered, a log related to API start/end is not output. When it is omitted, it is regarded as OpeLog=Yes.
4)This API does not check type=<value> and any argument other than StartDT=<value> and EndDT=<value> at type=RemoveSpan. Accordingly, if there are illegal arguments other than these, they are ignored.
©TOSHIBA Corp.
109
