TOSHIBA Network Camera - IK-WB15A - SDK (Ver 1.00.SC)
From the last page.
Item | Type | Entry name | Entry value | Std.val | Unit |
RecipientAddr | any (max.64 bytes) |
| - | ||
Send when Alarm IN |
| AlarmIn | 1:OFF 2:Checked | 1 | - |
Send when Motion detected |
| Motion | 1:OFF 2:Checked | 1 | - |
RecipientAddr | any (max.64 bytes) |
| - | ||
Send when Alarm IN |
| AlarmIn | 1:OFF 2:Checked | 1 | - |
Send when Motion detected |
| Motion | 1:OFF 2:Checked | 1 | - |
RecipientAddr | any (max.64 bytes) |
| - | ||
Send when Alarm IN |
| AlarmIn | 1:OFF 2:Checked | 1 | - |
Send when Motion detected |
| Motion | 1:OFF 2:Checked | 1 | - |
Log output control of cgi common to all types | OpeLog | No/Yes [default: Yes] (omissible) | - | - | |
1.6.3Output
Code | Status |
20 | OK |
30InvalidType
31InvalidEntry
Code | Status |
32InvalidValue
33InvalidOperand
34NoEntryData
Code | Status |
92 | CriticalError |
1.6.4Example
1)http://10.1.0.1/api/wbsetcammail.cgi?type=Default
2)http://10.1.0.1/api/wbsetcammail.cgi?type=Authentication&Mode=1&SMTPServer=www.hogehoge.com
3)http://10.1.0.1/api/wbsetcammail.cgi?type=ConditionByAlarmIn&Mode=1
4)http://10.1.0.1/api/wbsetcammail.cgi?type=ConditionByMotion&Mode=2&Subject=Motion&Body=Detection
5)http://10/1.0.1/api/wbsetcammail.cgi?type=AttachSize&AttachSize=3
6)http://10.1.0.1/api/wbsetcammail.cgi?type=Recipient&MustSendAdminMode=2
7)
1.6.5Notes
1)If only type=<value> is entered and then <entry>=<value> is not entered, no setting is performed. (type=Default is an exception.)
2)Multiple type=<value> cannot be enumerated simultaneously. This API must be started for each type.
3)When
4)When a blank character is included in <value>, it must be
5)For only entered items, setting is performed. For the other items, their existing values are held.
6)When OpeLog=No is entered, a log related to API start/end is not output. When it is omitted, it is regarded as OpeLog=Yes.
©TOSHIBA Corp.
27
