TOSHIBA Network Camera - IK-WB15A - SDK (Ver 1.00.SC)
3.4FTP Server Settings
wbsetnwkftpserver.cgi
3.4.1Syntax
1)http://<camip>/api/wbsetnwkftpserver.cgi?type=Default
2)http://<camip>/api/wbsetnwkftpserver.cgi?type=Set[&Mode=<value>][&LoginID=<value>][&...]
3.4.2Input
Item | Type | Entry name | Entry value | Std.val | Unit |
Reset to Default | type=Default | - | - | - | - |
FTP function | type=Set | Mode | 1:OFF 2:ON | 1 | - |
Login name |
| LoginID | any (max.32 bytes) | root | - |
Password |
| Password | any (max.32 bytes) | ikwb | - |
Max simultaneous connections |
| MaxConnection | 1 | - | |
Log output control of cgi common to all types | OpeLog | No/Yes [default: Yes] (omissible) | - | - | |
3.4.3Output
Code | Status |
20 | OK |
30InvalidType
31InvalidEntry
Code | Status |
32InvalidValue
33InvalidOperand
34NoEntryData
Code | Status |
92 | CriticalError |
3.4.4Example
1)http://10.1.0.1/api/wbsetnwkftpserver.cgi?type=Default
2)http://10.1.0.1/api/wbsetnwkftpserver.cgi?type=Set&Mode=2&LoginID=<base64enc>&Password=<base64enc>&MaxConnection=5
3.4.5Notes
1)If only type=<value> is entered and then <entry>=<value> is not entered, no setting is performed. (type=Default is an exception.)
2)Multiple type=<value> cannot be enumerated simultaneously. This API must be started for each type.
3)When LoginID/Password is specified at
4)When a blank character is included in <value>, it must be
5)For only entered item, setting is performed. For the other items, their existing values are held.
6)When OpeLog=No is entered, a log related to API start/end is not output. When it is omitted, it is regarded as OpeLog=Yes.
©TOSHIBA Corp.
44
