Toshiba Toshiba Wbsetadminsetdefault.cgi, It may take about 30 seconds to complete the operation

TOSHIBA Network Camera - IK-WB15A - SDK (Ver 1.00.SC)

5.5Reset All Camera Informations to Default

wbsetadminsetdefault.cgi

5.5.1Syntax

1)http://<camip>/api/wbsetadminsetdefault.cgi?type=Default

5.5.2Input

Item	Type	Entry name	Entry value	Std.val	Unit
Reset to Default	type=Default	-	-	-	-
Log output control of cgi common to all types		OpeLog	No/Yes [default: Yes] (omissible)	-	-

5.5.3Output

Code	Status
20	OK

30InvalidType

31InvalidEntry

Code Status

32InvalidValue

33InvalidOperand

34NoEntryData

Code	Status
92	CriticalError

5.5.4Example

1)http://10.1.0.1/api/wbsetadminsetdefault.cgi?type=Default

5.5.5Notes

1)Reset all the camera information to the factory-set status provided at delivery from the factory.

2)Because the network information is changed, the client may not receive the normal termination status “20 OK\r\n” at completion of this API execution.

3)If any error is found in an input parameter to the API, the camera information is not reset to the factory-set status provided at delivery from the factory. Accordingly, the client can receive all the status described in the output.

4)It may take about 30 seconds to complete the operation.

5)After completion of the operation, the camera is not rebooted automatically. The power supply of the camera must be turned on/off or the camera must be separately rebooted by wbsetadmincamreboot. cgi.

6)Inside the camera, the information is reset to the factory-set status provided at delivery step by step. For details, refer to Appendix.B.

©TOSHIBA Corp.

54