| TOSHIBA Network Camera - | SDK (Ver 1.00.SC) |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| From the last page. | |
|
|
|
|
|
|
|
|
| Item |
| Type | Entry name | Entry value | Std.val | Unit |
| Bottom limit | type=BottomLimitSetting | Mode | 1:OFF 2:ON | 1 | - | |
| Bottom limit position |
|
| Degree | 0 - 1200 | 0 | - |
| Log output control of cgi common to all types |
| OpeLog | No/Yes [default: Yes] (omissible) | - | - | |
2.1.3Output
Code | Status |
20 | OK |
30InvalidType
31InvalidEntry
Code | Status |
32InvalidValue
33InvalidOperand
34NoEntryData
Code | Status |
92 | CriticalError |
2.1.4Example
1)http://10.1.0.1/api/wbsetptbasic.cgi?type=Default
2)http://10.1.0.1/api/wbsetptbasic.cgi?type=PTCondition&ScanSpeed=2&PowerUp=4&FreezeActivity=2
3)http://10.1.0.1/api/wbsetptbasic.cgi?type=AssociationToAlarm&Mode=2&PTByMotion=2&PresetNumber=33&Resume=1
4)http://10.1.0.1/api/wbsetptbasic.cgi?type=LeftLimitSetting&Mode=2&Degree=175
5)http://10.1.0.1/api/wbsetptbasic.cgi?type=RightLimitSetting&Mode=1
6)http://10.1.0.1/api/wbsetptbasic.cgi?type=TopLimitSetting&Mode=2&Degree=175
7)http://10.1.0.1/api/wbsetptbasic.cgi?type=BottomLimitSetting&Mode=1
2.1.5Notes
1)If only type=Set is entered and then <entry>=<value> is not entered, no setting is performed. (type=Default is an exception.)
2)Multiple type=<value> cannot be enumerated simultaneously. This API must be started for each type.
3)For only entered items, setting is performed. For the other items, their existing values are held.
4)When OpeLog=No is entered, a log related to API start/end is not output. When it is omitted, it is regarded as OpeLog=Yes.
5)Setting values of “Degree” is defined in Appendix.C.
©TOSHIBA Corp.
31
