Toshiba Toshiba manual Wbsetptautopatrol.cgi

TOSHIBA Network Camera - IK-WB15A - SDK (Ver 1.00.SC)

2.3Auto Patrol Settings

wbsetptautopatrol.cgi

2.3.1Syntax

1)http://<camip>/api/wbsetptautopatrol.cgi?type=Default

2)http://<camip>/api/wbsetptautopatrol.cgi?type=StayTime[&StayTime=<value>]

3)http://<camip>/api/wbsetptautopatrol.cgi?type=AutoPatrolStopNumber[&PresetNumber-1=<value>][&PresetNumber-2=<value>][&…]

2.3.2Input

Item	Type	Entry name		Entry value	Std.val	Unit
Reset to Default	type=Default	-	-		-	-
Auto patrol stop time	type=StayTime	StayTime	1/2/5/10		1	minute
Preset number -1	type=AutoPatrolStopNumber	PresetNumber-1	1:OFF	2:Checked	1	-
………				………
Preset number -64		PresetNumber-64	1:OFF	2:Checked	1	-
Log output control of cgi common to all types		OpeLog	No/Yes [default: Yes] (omissible)		-	-

2.3.3Output

Code	Status
20	OK

30InvalidType

31InvalidEntry

Code Status

32InvalidValue

33InvalidOperand

34NoEntryData

Code	Status
92	CriticalError

2.3.4Example

1)http://10.1.0.1/api/wbsetptautopatrol.cgi?type=Default

2)http://10.1.0.1/api/wbsetptautopatrol.cgi?type=StayTime&StayTime=10

3)http://10.1.0.1/api/wbsetptautopatrol.cgi?type=AutoPatrolStopNumber&PresetNumber-1=2&PresetNumber-33=2

2.3.5Note

1)If only type=<value> is entered and then <entry>=<value> is not entered, no setting is performed. (type=Default is an exception.)

2)Multiple type=<value> cannot be enumerated simultaneously. This API must be started for each type.

3)For only entered items, setting is performed. For the other items, their existing values are held.

4)When OpeLog=No is entered, a log related to API start/end is not output. When it is omitted, it is regarded as OpeLog=Yes.

©TOSHIBA Corp.

34