TOSHIBA Network Camera - IK-WB15A - SDK (Ver 1.00.SC)
3.2Bandwidth Control Settings
wbsetnwkbandwidth.cgi
3.2.1Syntax
1)http://<camip>/api/wbsetnwkbandwidth.cgi?type=Default
2)http://<camip>/api/wbsetnwkbandwidth.cgi?type=Set[&Mode=<value>][&Numeric=<value>][&BandWidth=<value>]
3.2.2Input
Item | Type | Entry name |
| Entry value |
| Std.val | Unit |
Reset to Default | type=Default | - | - |
|
| - | - |
Function | type=Set | Mode | 1:OFF | 2:ON |
| 1 | - |
Band numeric |
| Numeric |
|
| any (0<n<=102400) | 100 | - |
Band unit |
| BandWidth | 1:Kbit/S | 2:Mbit/S |
| 2 | - |
Log output control of cgi common to all types | OpeLog | No/Yes [default: Yes] (omissible) |
| - | - | ||
3.2.3Output
Code | Status |
20 | OK |
30InvalidType
31InvalidEntry
Code | Status |
32InvalidValue
33InvalidOperand
34NoEntryData
Code | Status |
92 | CriticalError |
3.2.4Example
1)http://10.1.0.1/api/wbsetnwkbandwidth.cgi?type=Default
2)http://10.1.0.1/api/wbsetnwkbandwidth.cgi?type=Set&Mode=2&Numeric=256&BandWidth=1
3.2.5Notes
1)If only type=<value> is entered and then <entry>=<value> is not entered, no setting is performed. (type=Default is an exception.)
2)Multiple type=<value> cannot be enumerated simultaneously. This API must be started for each type.
3)For only entered items, setting is performed. For the other items, their existing values are held.
4)When OpeLog=No is entered, a log related to API start/end is not output. When it is omitted, it is regarded as OpeLog=Yes.
©TOSHIBA Corp.
42
