![](/images/new-backgrounds/1286564/286564151x1.webp)
TOSHIBA Network Camera - IK-WB15A - SDK (Ver 1.00.SC)
7.7Abort stream (abort10)
getstream.cgi
7.7.1Syntax
1)http://<camip>/api/getstream.cgi?<clientID>&<uniqueID>&<ID>&<PW>&<streamType>&<interval>&<mode>&<value>&<timeOut>
7.7.2Input
Parameter | Value | Explanation |
<clientID> | Enter a unique ID of up to 15 digits. | This <clientID> is used as an index to forcibly terminate (abort10) the |
|
| streaming execution task from the outside. It cannot be omitted. |
<uniqueID> | Enter a unique ID of up to 15 digits. | Embed the current time data of the client on each occasion. Originally, this is |
|
| used as a cache reading preventive means in using the browser by |
|
| continuously changing the value. If there is not any problem similar to the |
|
| browser in an application, this parameter can be left blank. |
<ID> | Enter the administrator ID that is | Originally, it is mandatory to enter the administrator ID. |
|
| In the |
<PW> | Enter the administrator PW that is | Originally, it is mandatory to enter the administrator PW. |
|
| In the |
<streamType> | Specify “10” for the type of abort10. | Termination of external abort: 10 |
|
|
|
<interval> | “0” | When <streamType> is “10”, this parameter may have any value. However, |
|
| enter “0”. |
<mode> | “0” | When <streamType> is “10”, this parameter may have any value. However, |
|
| enter “0”. |
<value> | “0” | When <streamType> is “10”, this parameter may have any value. However, |
|
| enter “0”. |
<timeout> | Set the execution timeout value in ms. | Set the execution timeout value in ms for the case where a |
|
| |
|
| while |
7.7.3Output
The format is the same as that for getting Live Pictures by streaming. For details, refer to Appendix.A.
7.7.4Example
1)http://10.1.0.1/api/getstream.cgi?3087&3087&cm9vdA==&aWt3Yg==&10&0&0&0&9000
7.7.5Notes
1)abort10 stops all the streams that are currently distributed.
2)The 4 interfaces of ‘Live Picture stream’, ‘Playback Picture stream’, ‘Live Audio stream’ and ‘Abort stream’ are common APIs. However, the meaning of each parameter varies depending on the target to be executed.
3)It is desirable that the stream should be stopped by abort5 or abort10. This will reduce the network load of the
©TOSHIBA Corp.
71