Toshiba Toshiba manual There is no image fields, 127

TOSHIBA Network Camera - IK-WB15A - SDK (Ver 1.00.SC)

As compared with the normal status, this status is characterized by the following two points:

-There is no <<image fields>>.

-The “stream” message (<stream msg>) is added together with the Length indicating line before the stream termination message of “EndOf-getstream.cgi”.

---Contents of <stream msg> ---

<stream msg> is a message to be used to notify the client of a streaming execution result and its length is fixed to 20 bytes in every message. This is used not only to notify an error message but to notify a streaming forced termination status such as abort5/abort10.

“EndOf-getstream.cgi” is a part of <stream msg> and a message that is always output when streaming ends. Next, the types of <stream msg> message and the output timing of these messages are described below.

Item No.	Message type	contents of message	Status	Note
1.	Normal-1 OUT	EndOf-getstream.cgi.	both normal and error	This message may always be output with the
	(streaming exec task/abort exec task)			exception of abort10.
2.	Normal-2 OUT	Not Found	normal	The last data has been distributed at reproduced
	(streaming exec task)			image stream distribution.
3.	Error-1 OUT	Parameter Error	error	An error has found in an input parameter to the
	(streaming exec task)			stream.
4.	Error-2 OUT	unmatch auth info...	error	The ID/PW authentication information does not
	(streaming exec task)			match. In the IK-WB15A. This error is not notified.
5.	Emergency Normal-1 OUT	Abort	normal	Stream distribution has been forcibly terminated by
	(streaming exec task)			an abort5/10 request.

©TOSHIBA Corp. Appendix.A

127