Do not open the rear door | Toshiba TOSNIC-7000S instruction

6 F 3 H 1 0 0 1

2.Safety Precautions (continued)

WARNING

Do not open the rear door.

The parts inside carry high voltage. Touching them may result in electric shock, burns or failure.

PROHIBITED

CAUTION

Operators should be qualified* personnel.

Operation of the UPS by unqualified or untrained personnel may result in electric shock, injury or failure.

*In accordance with customer stipulations

MANDATORY

Make sure the air vents on the front and top of the unit are not blocked.

Blocking the vents will cause the temperature inside the unit to rise and may result in fire or unit failure.

PROHIBITED

Make sure you understand the meaning of the warning labels on the equipment, and follow the precautions indicated.

Operating the equipment with an inadequate understanding of these matters may result in electric shock or burns.

•See Page 6 for the location of these warning labels.

MANDATORY

- 5 -

Page 6

Image 6

Toshiba TOSNIC-7000S instruction manual Do not open the rear door, Accordance with customer stipulations

Contents

July 3 H 1 0 0ALL Rights Reserved Procedure and the status of the UPS unit Vent type stand-alone lead storage batterySealed stand-alone lead storage battery Synchronized mode Safety Precautions IntroductionExact nature of what must be done is indicated 3 H 1 0 0 Safety Precautions Use Cards Do not open the rear door Accordance with customer stipulations Locations of the Warning Labels Example 300 kVA Be always Do not turn off Turn on RunningDo not touch rotating section Handling Precautions 3 H 1 0 0 Handling Precautions 3 H 1 0 0 Handling Precautions Contents Appearance Example 300 kVA Example 300 kVA C52R D72B E52R F52M G52L H8A I6CH Controls and Circuit ConfigurationPanel Controls This may result in failure Circuit Configuration Fault UPS 3 H 1 0 0 Panel Key-switch Key-switch Function Name RemarksPanel Keys Key Functions For HS or AHH individual battery systems Name Function Remarks Panels Graphic Display Panel 2 Graphic Display Panel Control This LED is unlit when the converter has stopped This LED lights up when the UPS is operatingThis LED lights up when the AC input circuit breaker Operating. It blinks when the converter is starting up LCD Display Scroll up Scroll down 200V 3 H 1 0 0 Normal Display ScreenNormal Display Screen LCD Screen Description 50 % BYP I/P-V Normal Display Screen60.0Hz 401V 52R Trip 3 H 1 0 0 Failure Display ScreenFailure Display Screen LCD Screen Description 98-09-09 3 H 1 0 0 LCD Screen Switching Operation Operation General Description/Objective Types of OperationPre-operational check Startup Starts up and operates the stopped UPS Procedures Startup Main circuit AC input Circuit breaker 52R When the message Appears, turn onBypass Press ‘RUN’ Switch Bypass Move #52R to ‘ON’ Position To finish On page 14 for at least SecondWait several seconds For the startup process Main circuit DC input Hold down the UPS Key g in the Figure → The will start Power supply Changing processUPS power supply On page14 for at 3 H 1 0 0 Switch Power Supply UPS → Bypass 3 H 1 0 0 3 H 1 0 0 Stop Stop Restart Press ‘RUN’ Switch Shutdown Move #52R to ‘OFF’ Breaker72BBatteries LED unlit → This complete UPS Shutdown 3 H 1 0 0 Complete Shutdown Complete Shutdown Turn off the precharge Circuit switch 6CHUsing the scroll keys Wait about 20 minutes Until the DC capacitor Changing From Floating Charge to Equalized Charge Second → Change to floating Charge is complete Changing From Equalized Charge to Floating ChargeCheck to make sure That the Equal Float Charge LED lit Equal Charge LED unlit Changing from Protective Charge to Floating Charge 3 H 1 0 0 Changing the Power Supply to Maintenance Bypass Changing From UPS to maintenance Bypass Power Supply 1 Startup Changing From Maintenance Bypass to UPS Power SupplySame as steps 1-4 52R 72B 52C 52M 52L Troubleshooting Types of ErrorsName Description 52R Trip 98-09-09 LCD Failure DisplaysFailure Data Screen Failure Data Screen Descriptions ↑ indicates there is a warning screen before this screen Up to 10 screens of warning data can be displayedShows the nature of the warning. For details, see Section ↓ indicates there is a warning screen after this screen 3 H 1 0 0 Failure Messages Protective Detector Locations Fault Trip LCD Message Description Indication Battery temperature has risen Bypass input frequency errorIncluding operation error Battery fluid level has gone below prescribed level For Individual battery systems. For HS or AHH batteries Position of Scroll Keys in Failure Data Screens Scroll Keys Scrolls to the previous screen see FigureScrolls to the next screen see Figure Procedure Saving Waveforms Only open the front panel when performing necessary Restoring UPS Operation Failure Data screens 98-09-09 By scrolling with scroll 11 Restoring UPS Operation ExampleAlso check for other Panel

Toshiba TOSNIC-7000S Do not open the rear door, Accordance with customer stipulations

Models: TOSNIC-7000S

6 F 3 H 1 0 0 1

Do not open the rear door.

Operators should be qualified* personnel.

*In accordance with customer stipulations