®
Mount the termination module
Mount the termination module
After selecting a suitable location for the Tracker controller, mount the termination module. Mounting consists of securing the termination module to a wall or a 2 in. × 4 in. recessed conduit box (mounted vertically or horizontally) or a 4 in. × 4 in. recessed conduit box (several European electrical box sizes are also usable) and installing electrical conduit (optional). Figure 12 shows the conduit access and mounting holes on the termination module.
Figure 12. Termination module conduit access and mounting holes
Conduit connector | Conduit access |
(three places) |
Holes for mounting on a 2 in. x 4 in. conduit box horizontally
(left and right)
Two holes for mounting on a wall (one on each side)
Holes for mounting on a 4 in. x 4 in. conduit box (four corners)
Jamb nut (attaches to conduit connector)
Termination board
Holes for mounting on a 2 in. x 4 in. conduit box vertically
(top and bottom)
| 19 |
