Trane BMTK-SVN01D-EN, Building Automation System manual Connecting with one cable

®

Chapter 6 PC workstation wiring

Connecting with one cable

To make an Ethernet connection between the Tracker controller and a Tracker PC Workstation using one cable, you need one CAT 5 crossover cable.

1.Connect one end of the CAT 5 crossover cable to the RJ-45 Ethernet LAN port on the bottom side of the Tracker controller (Figure 29).

2.Connect the other end of the cable to the RJ-45 Ethernet LAN port on the Tracker PC Workstation.

Figure 29. Tracker Ethernet LAN connection to a PC workstation with one cable

Tracker

Controller

RJ-45 Ethernet

LAN port (back)

RJ-45 Ethernet

LAN port (bottom side)

CAT 5 crossover cable

54 BMTK-SVN01D-EN