Installation
Rigging
WARNING
Heavy Objects!
Do not use cables (chains or slings) except as shown. Each of the cables (chains or slings) used to lift the unit must be capable of supporting the entire weight of the unit. Lifting cables (chains or slings) may not be of the same length. Adjust as necessary for even unit lift. Other lifting arrangements may cause equipment or
Use spreader bars as shown in the diagram. Refer to the installation manual or nameplate for unit weight. Refer to the installation instructions located inside the central panel for further rigging information.
Figure 15. Rigging and
A Rigging illustration and
1.Rig the condensing unit as shown in Figure 15. Attach adequate strength lifting slings to all four lifting brackets in the unit base rail. Do not use cables, chains, or slings except as shown.
2.Install spreader bars, as shown in Figure 15, to protect the unit and to facilitate a uniform lift. The minimum distance between the lifting hook and the top of the unit should be 7 feet.
3.
4.Lift the unit and position it into place.
23 |
