Tyco 4100U installation manual Connecting to Motherboards continued, 733-525Harness

Step 4. Interconnecting Modules and Bays, Continued

Connecting to Motherboards (continued)

2.Connect the other end of the harness to the leftmost motherboard in the next bay, as described below. Make sure to route the wiring on the left side of the bay.

•Insert the harness connector with the blue wire into the P2 connector. Note that the P2 connector has eight pins. Insert the harness connector on either the top four pins or the bottom four pins, not in the middle.

•Insert the harness connector with the white wire into the P3 connector. Note that the P3 connector has eight pins. Insert the harness connector on either the top four pins or the bottom four pins, not in the middle.

733-525 Harness

Connector with Blue Wire Goes to P2

Connector with White Wire Goes to P3

Figure 2-8. Power and Communication Wiring for Motherboards

2-14