Tyco installation manual Installing 4100 MINIPLEX Components, Non-4100U, 3-29

Step 6. Installing LED/Switch Modules into Expansion Bays (4100U)	2-20
Overview	2-20
The LED/Switch User Interface	2-21
LED/Switch Controller Card	2-21
LED/Switch Modules	2-22
Configuring the LED/Switch Controller Card	2-22
Activating the Communication Loss Feature	2-22
Mounting LED/Switch Modules to the Expansion Bay	2-23
Mounting the Controller Card Assembly	2-24
Changing Display Card LEDs	2-24
Interconnecting Cards	2-25
Wiring Instructions	2-26
The Terminal Block Utility Module (4100U)	2-27
Overview	2-27
Mounting to the Electronics Bay	2-27

Chapter 3 Installing 4100 MINIPLEX Components
(Non-4100U)	3-29
Introduction	3-29
In this Chapter	3-29
Introduction to MINIPLEX Systems (Non-4100U)	3-30
Overview	3-30
MINIPLEX System Components (Non-4100U)	3-32
Overview	3-32
The RUI Card	3-32
Transponder Cabinets	3-32
The Remote Interface Card (RIC)	3-33
MINIPLEX System Guidelines (Non-4100U)	3-34
Overview	3-34
Guidelines	3-34
Installing Modules into Cabinets (Non-4100U)	3-35
Overview	3-35
Guidelines	3-35
Installing the RUI Motherboard	3-35
Installing the RIC II Motherboard	3-36
Connecting the 733-525 Harness	3-37
MINIPLEX Wiring (Non-4100U)	3-39
Overview	3-39
Wiring Configurations	3-39
Class A Wiring	3-39
Class B Wiring	3-39
Wiring Illustration	3-40

Chapter 4 Installing 4100U MINIPLEX Components	4-1
Introduction	4-1
In this Chapter	4-1
Introduction to MINIPLEX Transponders (4100U)	4-2
Overview	4-2
Transponder Cabinets	4-2
Transponder Interface Cards (TICs)	4-2
Basic TICs	4-2
The Local Mode TIC (Not currently available in Australia)	4-3
TIC Illustrations	4-4

vii