![](/images/new-backgrounds/1267265/26726547x1.webp)
Controls and Functions
9.IR
Wired input from a wired remote control or infrared receiver. It is a
Ring = +5V Tip = IR Input Sleeve = Ground
When an external remote control or infrared receiver is connected to the
Note | wired IR input, the IR sensor on the front of the VHD is disabled. |
|
10.RS-232 CONTROL PORT
A female,
11.POWER INPUT (100 to 240 VAC)
Connect the VHD Controller to power here.
12.MAIN AC FUSE
This is the main AC input fuse (5mm x 20mm, 500 mA, 250V
13.MAIN POWER SWITCH
Disconnects or applies power to the VHD Controller.
12 | Vision Model 140/150 Owner’s Operating Manual |