3.8
Turning on the Power
1.Turn on your source components.
2.Turn on the main power switch at the rear of the VHD Controller.
3.If this is an
4.Press the ON button on the remote control – or the POWER button on the VHD Controller front panel – to turn on the system. The vacuum fluorescent display on the VHD Controller front panel briefly displays “Starting Display.”
The LED status window at the rear of the projector displays an active pattern of segments to indicate that it is changing its state from “standby” to “on.”
5. When the projector has completed its initialization and is ready for use, “On” appears in the projector LED status window.
The fluorescent display on the VHD Controller indicates the active source, signal format (NTSC or PAL), input resolution and aspect ratio; for example:
|
| Input |
Current Source | Format | Resolution |
Component SD NTSC | 480i | |||
16:9 |
|
| V150 | |
|
|
|
|
|
|
|
|
|
|
Aspect Ratio
38 | Vision Model 140/150 Owner’s Operating Manual |
