SCANNING FROM THE TWAIN INTERFACE 83
6.Click OK to save your changes and close the OneTouch Properties window.
7.Press the button on the scanner or click on the button on the OneTouch Panel.
8.The TWAIN interface will now open.
This is the Basic
TWAIN Interface
Click either Advanced Interface or Basic Interface to toggle between the two TWAIN interface options.
Note: If you choose to use OneTouch Configure Before Scan for scanning from the TWAIN interface, the final image will be sent to the destination application set for that button. Please see “Destination Application Properties” on page 30 for more information on OneTouch destinations.
Note: At this time the TWAIN interface is where you will adjust your scan settings. Please see the following section for adjusting the scan settings in the Basic and Advanced interfaces.
