Visioneer OneTouch 7400 manual Onetouch Button Panel Features

SCANNING FROM ONETOUCH 23

ONETOUCH BUTTON PANEL FEATURES

The OneTouch Button Panel is your on-screen set of controls for the scanner. In addition, the panel shows information about the scanner and its settings.

Click the green arrows at the top of the panel to cycle back and forth through three views of the panel.

1.From the main Button Panel:

■Click the arrow pointing to the left to see the Hardware view which shows the scanners currently attached to your computer.

■Click the arrow that points to the right to see the Detail view which shows the scan setting details of the currently selected button.

Click these green arrows to cycle through the panel’s views.

Shows the 5 scanning options, and mirrors the buttons on the scanner.

The Button Panel

The Hardware View. The Detail View.

This view shows the connected scanner(s). You can click either the green arrow or the scanner icon to get back to the previous view.

This view shows the scan settings for the button currently selected on the One- Touch Properties window. Right-click the icon to see the window.

2.On the OneTouch Button Panel:

■Left-clicka Destination Application icon to start the scanning. If the OneTouch Properties window is open, you must close it first.

■Right-clicka Destination Application icon to see its scan settings.

3.To close the OneTouch Button Panel, click the close button at its top right corner.